Cnc Drill Line Homes
MultMaster functions as an extension to the Roller Feed measurement method. This allows for cuts that might otherwise require manual positioning. This accessory makes it easy to process material on a Voortman saw and drill tandem system.
CNC Drill Lines are 100% hydraulic machines that make maintenance and parts very affordable. CNC Drilling Line was made to be used worldwide and only uses parts from major manufacturers. The majority of components can be found locally. Voortman maintains all parts in stock so that they can be delivered next day to the USA. In most countries that we serve, we offer local assistance and support.
CNC Drill Line will not only drill columns and beams but can also process all types of steel profiles such as channel, angle, flat bars, base plates and RHS square and circular profiles.
We have used more than 1,000 CNC Drill Line and Angle Lines in the world. We have found that even an experienced operator who has never programmed before can use the machine efficiently in less than half an day.
Automatic Edge Finder – The edge finder can be used manually (Jogging method & Screen Buttons), programmatically, or fully automated (dedicated programme). This option adjusts offsets and program rotation to match orientation and location on the cutting board.
CNC Drill Line offers the most affordable CNC beam drilling line available today, which allows the fabricators to win more jobs and make more margin.
Z-Reader Probe- The Z-Reader probe is used to map the surface. You can control it manually or programmatically. It is not active during cutting and can be retracted to keep it out of harm's path. You can trigger it to check the surface at each pierce before cutting begins. Or, you could use it to drive the surface mapping of the entire part. It starts with the initialization of the device to the surface at program start. The difference is then accumulated or tracked.
This Morse Taper chuck adaptor allows you to use standard parallel shank drill bits when drilling smaller diameters. It allows a maximum drill diameter of ?” (12mm) and a minimum diameter of 3/64? (1mm)
FlexBeam is a new machine tool designed for the fast, precise, and economical production of steel profiles. This machine is an efficient solution for beam processing in small- to medium-sized shops that are looking to take on larger projects.
The ability to mill quickly speeds up project completion. With the Advantage-2 user-friendly Raptor 3DCAD/CAM program, it is possible to quickly program parts. Directly access the 3D platform to view, modify and export information. Advantage-2 drills are known for their scribing capabilities, the ability of milling slots and large lifting holes, and they also have the ability to trace. This is what really sets this machine apart. You can create layout lines, piece marks, and central points with the scribing. This flexibility has allowed us to use the scribing when we need it and make our own decisions.
GSS Machinery’s magnetic brush and broom help with the removal of chips from the machine and for sweeping up chips from the floor
AC Unit on Electrical Cabinet. - The unit can be mounted on the cabinet’s High power (480v), side. It is in close proximity to the location that the drives are located. This option maintains the cabinet temperature and speeds up heat dissipation. All axes' servo drives are the major contributors to heat within the electrical cabinets.
The CNC Drill Line not only lays out and drills all your holes in any steel profile in a fraction of the time it takes you to do it manually with a mag drill, but it also lays out the marks for all your welded attachments, virtually eliminating the need for a tape measure.
Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.
Use a slow speed to drill. The slower a bit spins the more hot it becomes. And heat dulls bits quickly. It is a good idea for drill bits to be used at a slow speed when drilling through metal. Drill bits for hard metals such as steel and larger diameters require slower speeds.
Beam can support strain and pressure, while bars can maintain pressure (intended to take pressure). The Rods/Bars refer to any part that is exposed to the hub (Tensile/Compressive but no Transverse/Torsional load) Loads, as it were.
There are some guidelines and rules. According to IS 456:2000, the minimum thickness of RCC beams should not be less that 9'' (230mm). Therefore, RCC beams must be at least 9'' (230mm thick). Concrete grade M20 with T12 as tension bar at bottom and T10 at the top is recommended.
For small buildings, the distance between two reinforced columns is between 3-4m and 6-9m. Larger facilities that require large columns and lots of free space will have to be at least 6-9m. A distance of 5m is acceptable for ordinary structures. The maximum span is 7.5, while the minimum is 2.5m.
A 10mm diameter bar can be used to reinforce a beam's longitudinally, but this all depends on the beam's size, span, and the load placed over it. The designer determines the steel cross-section area required when designing.