Ocean Machinery
MultMaster can be used as an extension of the Roller Feed measuring system to perform cuts that may otherwise require manual positioning. This accessory simplifies material processing with a Voortman drill/saw tandem system. It automates the processing and reprocessing of small remnant sections.
5-Axis Renishaw Calibration – The calibration unit is a Renishaw model APCA45 with a modified spherical stylus. The device has a retractable cover and air purge to clear debris & dust during the activation process. It mounts to a swing arm controlled by a pneumatic rotary, so it is out of the way during regular operation and swings into the calibration position for calibration only.
Voortman has shaped today’s CNC beam drill line standard with time-tested technology. The Advantage-2 processes an average of 150 tons of steel per work week with the most efficient drilling, milling, scribing, tapping and countersinking operations.
Voortman exclusively designed and built the CNC Beam Drill Line to fit GSS Machinery. Voortman oversees all aspects of the CNC Beam Drill Line, including warranty and service. Voortman acts as the service provider. GSS Machinery will always assist should the need arise.
MultMaster acts as an extension for the Roller Feed measurement device to perform cuts that otherwise would require manual positioning. This accessory allows for fast material processing using a Voortman drilling and saw tandem system.
The CNC Beam Drill Line is able to lay out and drill holes in any steel profile in half the time it takes with a mag drilling machine.
Voortman proudly offers technical support 24 hours a day to its global clients. Voortman’s inside service staff have years-long experience in the field or assembly. They also have hands-on knowledge with many machines. Voortman's service personnel are always available to help you with any question that might arise.
Advantage-2 utilizes a number of support clamps to maintain the maximum rigidity of the workpiece. Carbide tools last longer if there is as little vibration as possible.
The FlexBeam is a newly launched machine tool developed for fast, accurate, and economic production of steel profiles. This machine is an efficient beam processing solution for small to medium-sized fab shops, looking to take on larger jobs.
Over the last ten years, the UNIST MQL cooling system has emerged as the dominant system for coolant in the USA. It is standard equipment on the Aveger FORTY/Avenger PLUS and Clipper. This minimal quantity coolant is made from oil and promotes longer tools life. It is non-toxic.
Although 90% of support issues can be resolved by Voortman’ 24 Hour Tech Support center, an expansive network of 50+ Voortman field service personnel are stationed throughout North and South America, Europe, Africa, Asia, Russia, the Middle East and Australia/New Zealand.
A 4-axis layout marking attachment eliminates human error in manual layout methods. Part information is retained even after painting, blasting and galvanizing.
Yes. There are many CNC Beam Drill Lines outside. Weather protection must be provided for the control panel as well as the mobile platform. For photos of many of our outdoor installations, please contact us.
CNC Beam Drill Line is able to import DXF files. It can then use these files to create 3-D shapes, provided that the steel has been detailed according to certain rules. These rules may not be applicable to your current detailing and might need some adjustments. This process is not as smooth as the 3-D modeling software.
Flange of T-beam/L-beam refers to the portion of the slab that acts in tandem with the beam to resist loads. The beam below the flange can be called Web or Rib. The T-beams support the slab, while the L-beams support it.
An I beam is stronger than a cylindrical tube for beams with equal weight and depth. This is because the I beam contains more material close to the extremities.
To increase your beam's bending capability, you will need to increase the second moment (I) if your beam design is controlled by yielding in bend (not lateral-torsional or plate buckling). This is usually done by attaching additional plates to your beam, often onto the flanges.
A box beam made from aluminum or acrylics will last longer than an I-Beam. It is stronger and more solid than an I-Beam.
For small buildings, the distance between two reinforced columns is between 3-4m and 6-9m. Larger facilities that require large columns and lots of free space will have to be at least 6-9m. A distance of 5m is acceptable for ordinary structures. The maximum span is 7.5, while the minimum is 2.5m.