Autocad
The CNC Beam Drill Line proved to be a big hit for small-to-medium fabricators that produce structural steel and miscellaneous material. Since its introduction in 2003, over 600 CNC Beam Drill Lines around the world have been installed. This machine has revolutionized the lives and livelihoods of many a steel fabricator.
FlexBeam is a brand new machine tool for producing steel profiles. It can be used to produce high-quality, cost-effectively and quickly. This machine can handle large-scale jobs and is an efficient option for small- to medium-sized fabrication shops.
The CNC Beam Drill Line not only lays out and drills all your holes in any steel profile in a fraction of the time it takes you to do it manually with a mag drill, but it also lays out the marks for all your welded attachments, virtually eliminating the need for a tape measure.
The CNC Beam Drill Line has two options: it can be programmed in-house or at work using the Peddimat programming software. This software comes as part of the AVENGER. The unlimited license allows you to install it on as many machines in your workplace as you'd like. It's the same software found on your machine.
The Advantage-2 employs a series of support clamps in order to achieve optimum rigidity of the workpiece through the machine. Carbide tool life is best sustained with the least amount of vibration possible.
When deciding which CNC machinery you want to purchase, it may come between a Vertical Machining Center or a CNC router. You can use these two different pieces of equipment for many reasons for various things. Which one should...
These drop-in, serrated grippers are used to secure flat bars, base plates, angles, and other profiles with rounded edges.
CNC Beam Drill Line is a space-saving beam processing solution. It only takes up 70ft x 9.9ft. This makes it great for fabricators with limited space. CNC Beam Drill Lines can also be placed outside, providing even more space for fabricators.
The Advantage-2 is powered with 25 HP (18.5kW), Siemens spindle motors. Each drill spindle has 5-station tool changers. This advanced drilling technology ensures maximum operating time, drill hole quality and efficiency.
Advantage-2 uses a series support clamps to ensure that the workpiece is as rigid as possible through the machine. The minimum vibration is the best way to extend carbide tool life.
At GSS Machinery we are committed to providing you as many options as possible with regard to drilling with your CNC Beam Drill Line or any other CNC Beam Drill Line.
To ensure smooth operation and low maintenance, our beam drill machine machines come with linear guides and central lubrication. A 4-station tool changer is included in each coordinate system. It allows it to drill/mill, scribe/counter sink or tap as necessary. The tools can also be changed easily mid-operation. An arm attached to the rack and pinion on the feed conveyor is used to position the beam while it passes through the drill. Our steel beam drill lines are much more accurate that friction roller machines.
Z-Reader Probe – The Z-Reader is a device for mapping the location of the surface. It can be controlled manually & programmatically. The option is NOT active while cutting & is retracted out of harm’s way. It can be triggered to verify the surface at every pierce before the cutting process starts, or it could be used to drive surface mapping of the whole part before cutting starts. It begins with initialization or zeroing of the device to the surface at the beginning of a program and then accumulates or tracks the difference from that zeroing effort.
CNC Beam Drill Lines can process beams and columns as well as all steel profiles including channel and angle, flat bar, base plate, RHS and square.
Flange of T-beam/L-beam refers to the portion of the slab that acts in tandem with the beam to resist loads. The beam below the flange can be called Web or Rib. The T-beams support the slab, while the L-beams support it.
An I beam is stronger than a cylindrical tube for beams with equal weight and depth. This is because the I beam contains more material close to the extremities.
To increase your beam's bending capability, you will need to increase the second moment (I) if your beam design is controlled by yielding in bend (not lateral-torsional or plate buckling). This is usually done by attaching additional plates to your beam, often onto the flanges.
A box beam made from aluminum or acrylics will last longer than an I-Beam. It is stronger and more solid than an I-Beam.
For small buildings, the distance between two reinforced columns is between 3-4m and 6-9m. Larger facilities that require large columns and lots of free space will have to be at least 6-9m. A distance of 5m is acceptable for ordinary structures. The maximum span is 7.5, while the minimum is 2.5m.