Cnc Beam Drill Line Guide

What good is a CNC drill line if it doesn't position a fabricator to compete at a high level in the steel fabrication arena. The Advantage-2 has the functionality to process technical programs with intelligence and speed. Equipped with three five-station tool changers, each drilling axis has the capability to drill, mill, countersink, tap and scribe. This drill line can also be equipped with a Signoscript underside scriber or Signomat part stamping unit. Part information is retained even after painting, blasting and galvanizing processes. Minimizing shop errors? Check. Carbide tooling gives the Advantage-2 more aggressive drilling and a higher quantity of holes than any drill line before it. The high torque drilling axes have a thicker more aggressive cut removing more chips with each rotation. This drill line will chew through beams, channel, angle, tube and even flat bar. With a processing window of 44 inches wide and 18 inches tall no profile can escape the reach of the Advantage-2.

Voortman's dedication to customer service and support is unmatched and the gold standard of the industry. Voortman has a worldwide team of customer service representatives who are available 24 hours a day at the Voortman customer support center. Voortman support is just a click or call away. With state-of the-art remote diagnostic software and readily available local field support, as well as an industry-leading warranty, it's easy to get help.

We have successfully installed over 1000 CNC Beam Drill Lines and Angle Lines all around the world. It has been our experience that an average operator who has never programmed a machine before can get up to 50% efficiency on it in less than half a day.

"..In our efforts to satisfy customer demands and increase productivity, we installed a new beam drilling line. This has resulted in a lower labor cost and faster turnaround times that have always helped us land high quality jobs.

"..We have drilled approximately 25,000 hole since we purchased our CNC Beam Drill Line just four months ago. It used take us about 5 minutes each to drill and lay out each hole. It now takes us around. 30 seconds per hole... an 1875 man hour savings in four months. That is $84,375 at our shop. As you can see, this machine will be fully paid off in less then one year. It is not only faster than our production, but it also allows us to free up floor space for other jobs.

If a CNC drill machine doesn't allow a fabricator the ability to compete at the highest level in steel fabrication, what good is it? The Advantage-2 is able to process technical programming with intelligence and speed. Each drill axis comes equipped with three five station tool changers. These can be used to drill, mill and countersink as well as tap and scribe. Signoscript underside or Signomat part stamping units can be added to this drill line. You can keep your part information even after you have finished painting, blasting, or galvanizing. Minimizing shop errors? Check. The Advantage-2's carbide tooling allows for more aggressive drilling and more holes per hour than any other drill line. The high torque drilling tools have a more aggressive cut, removing more chips each rotation. This drill line is capable of cutting through beams, channels, angles, tubes, and even flat bars. Advantage-2 can handle any profile with a processing window of 44inches wide by 18inches high.

We have seen more than 1000 CNC Beam Drill Lines, and angle lines installed all over the world. We found that the average operator can program a machine in half the time, even if they have never programmed one before.

Voortman is the only manufacturer of the CNC Beam Drill Line for GSS Machinery. Voortman takes care of all aspects of the CNC Beam Drill Line's installation, warranty, maintenance and repair. Voortman provides the service, but GSS Machinery can always be reached if required.