Cnc Beam Drill Line Drawing
Voortman is the only manufacturer of the CNC Beam Drill Line for GSS Machinery. Voortman takes care of all aspects of the CNC Beam Drill Line's installation, warranty, maintenance and repair. Voortman provides the service, but GSS Machinery can always be reached if required.
Automatic Edge Finder - The edgefinder can be used manual (Jogging Method and Screen Buttons), programmatically using M &G codes or fully automated with a dedicated program. This option sets offsets and rotates the program to match location and orientation on the cutting surface.
The Franklin HD145 (3) spindle CNC drill, with 44-inch width capacity. The HD-145 handles beams up to 750 lbs per foot. The hi-performance spindle design provides drilling capabilities up to 2,000 RPM. This rigid design provides extremely aggressive feed rates up to 300 surface feet per minute. The Franklin HD145 can be provided with several material handling packages from 300 lbs per foot, to 750 lbs per foot.
"..We have drilled about 25,000 holes since we bought our CNC Beam Drill Line around four months back. We used to need to drill every hole in 5 minutes. It takes us about. 30 seconds per hole = a savings totaling 1875 manhours in just 4 months. This saves us $84,375. This machine will pay for its cost in less that one year. It speeds up our production and frees up floor space to allow for additional jobs.
The CNC Beam Drill Line not just drills holes in any profile of steel in a fraction the time it takes, but also marks the locations for all your welded attachments.
Programming the CNC Beam Drill Line, even for operators without any previous computer or CNC experience is straightforward and intuitive.
".. Although the machine is targeted at structural fabricators, I found it to be very useful for drilling truck frames. This machine is very accurate and repeatable, which has made it easy to put together a truck frame. Avenger drills a series of channels for one truck within two hours. It takes 16 hours to do the same thing manually. This machine has dramatically increased our productivity, profitability, and efficiency !.."
The CNC Beam Drill Line is the most affordable CNC beam drill line on the market today and ensures that the fabricators is the low-cost producer, allowing him to win more work and to make more margin.
The Advantage-2 CNC beam drill line with its powerful material handling support, meticulous measurement capabilities and high speed designs are ideal for tandem installations with any of Voortman' automatic sawing systems.
Z-Reader Probe-- The Z-Reader Probe can be used to locate the surface. It can be used to programmatically or manually. This option is not activated while cutting and is easily retracted. It can be used to verify the surface of each pierce, or to map the entire surface before cutting begins. It starts by initializing or zeroing the device to a surface at the start of a program. After that, it accumulates or tracks any difference.
CNC Beam Drill Lines are space-efficient beam processing solutions. They require a minimum of 70ft by 9ft floor space. This makes it perfect for smaller fabricators and fabricators who have limited space. Many CNC Beam Drill Line installations are located outside, which allows for more fabricator space.
".. ". It has been easy to assemble the truck frames without any errors due to its repeatability and accuracy. Avenger drills channels for one truck in under two hours. This is compared to 16 hours if we had to do it manually. The machine has significantly increased our productivity and profitability !.."
CNC Beam Drill Lines are the most cost-effective CNC beam drill lines on the current market. This allows fabricators to win more work, and makes more margin.
Your operator will be trained in Peddimat. You might have customers who bring a couple of pieces with them.
The shorter beam will therefore be stronger for the same load. To compare beam strengths as the length changes, it takes more than the section modulus.
Manufacturers limit beams to 60 feet due to transport issues. Others can make beams up to 80 feet long. The longest supported span using LVL is 80 feet. It is normal for continuous LVL spans to be between 20'-30'.
As a minimum beam diameter, all structural engineers recommend a 12mm dia bar.
The beam will fail at its bottom if the cantilever beam material has lower compressive yield strengths than the tensile yield strengths. The beam may also fail if its tensile yield strength falls below the required level.
CNC drilling is a process where a rotating cutter cuts holes in a stationary piece of workpiece. These holes are usually made to accept machine screws or bolts. They can also be used to enhance the aesthetics of the component.