Tube Lasers Cutting Systems Ky

Perhaps you have noticed that we haven’t yet discussed cutting speed. Although it is possible to cut 500 inches per minute with a tube, this is not always feasible. Laser tube cutting should not be about how long it takes for a tube to be loaded, indexed so that it is in the right place for cutting, pierce it and then unload it. Laser tube cutting machines are more concerned with part-processing times than cutting speed.

Imagine that you need to put a through-hole at the center of a tube. It must be centered to the actual dimensions, not just one. This will make things more complicated. This is how tube manufacturing works.

You should also consider the shortcase-sized modules of the fiber laser. They provide redundancy. The resonator will not shut down completely if one of the modules has a problem. The fiber laser works in redundant mode so that the other modules can provide more power temporarily to sustain the down module's needs until they can be repaired. Field repairs are possible, however. Sometimes the fiber laser can produce less power while repairs are being made. An issue with a CO2 Resonator will cause the entire system to fail.

Fiber lasers don't require as much maintenance. It does not require the same attention as a CO2 laser-cutting machine in terms of mirror cleaning and bellows inspections. It doesn't require any maintenance, as long it has clean chiller water to cool off and its air filters are regularly changed.

The fiber laser does not require as much maintenance. The fiber laser doesn't need to be cleaned as often as a CO2 laser cutter machine. The fiber laser does not require any preventive maintenance as long as it has access to clean chiller water and that the filters are regularly replaced.

North America's most important magazine for metal forming and fabricating, The FABRICATOR is the FABRICATOR. The magazine provides news, technical articles and case histories to help fabricators do their jobs better. Since 1970, the FABRICATOR has been serving the industry.

The Coherent StarCut Tube hybrid version offers the best flexibility to cut different medical devices in metals and plastics from flat stock or tubes. This compact, turnkey laser machine combines two lasers into one compact housing.

Monaco high-power Femtosecond Lasers offer exceptional edge quality in micromachining, and improves in scientific applications such three-photon Microscopy.