Tube Lasers Cutting Systems Online
The wavelength of fiber lasers is 0.06 microns. This difference is 10 times smaller than the wavelength of CO2 lasers. A fiber laser beam produces a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 light source. However, a CO2 light source is much more likely be absorbed by reflective materials. Fiber laser cutting machines have the ability to cut brass, copper, or other reflective materials. Note that CO2 laser light that reflects off the material could not only damage the machine's optical system, but also the entire beam pathway. This risk is eliminated when the beam path is made of fiber-optic cable.
Micrometric Ltd uses the Coherent StarCut Tub laser cutting machine to provide speed and precision in medical and aerospace production.
Our tube laser manufacturing capabilities allow Gulf States Saw & Machinery Co., Inc. to offer our customers the opportunity to replace manual processes and improve the cutting process.
Many of Gulf States Saw & Machinery Co., Inc.’s tube laser-cutting system integrate intelligent functions such as monitoring, setting up, and cutting. These automated functions increase machine efficiency and ease-of-use. The wide range of capabilities offered by Gulf States Saw & Machinery Co., Inc.’s tube and pipeline lasers make these machines suitable for many industries and a variety if applications.
No downtime or extended lead times: By combining a tube mill and tube laser in a single facility, we can move your project through each stage with no gaps or delays. We are a full line service center that will:
Imagine putting a through hole centered on a tube. It should be centered according to the actual dimension and not just one side of the tube. Bowed tubes will make it more difficult. Tube fabricating is hard work.
The images of product are used for illustration purposes only. They may not represent the exact product. Gulf States Saw & Machinery Co., Inc. reserves every right to make changes to product specifications and images without prior notice.
The best tube laser cutting solution. Tubes upto O9.45" (220 mm)3D-cutting modeCO2 (or fiber laser)
CO2 lasers are characterized by their high cutting quality.Their primary area of application lies in the medium to high range of materialthicknesses. The cutting edges achieved with the laser beam excel throughburr-free cutting and low scoring. This means that the cut parts can beprocessed further without reworking.
Cameras are being used by machinery manufacturers to inspect tubes. The quality check takes only about half an second, and the rotations required are reduced. This allows the machine's productivity to be maintained as well as its accuracy.
Traditional tube features can be tedious. FabLight makes getting exactly what you want and how it was designed easy. It takes just minutes.
To close the time gap when it comes to tube checks, some machinery manufacturers are using cameras for these checks. They reduce the quality check to about half a second and also reduce the number of rotations that are required. This allows the machine to retain productivity as well as accuracy.
Laser tube cutting systems are our 2D and 3D laser cutting systems for tubes, bars and profiles, from 12 mm to 610 mm (.5” to 24") in diameter and up to 18 m (60') in length.
The CO2 resonance is larger and requires more power as electricity is used to heat a mixture of gases to produce the laser beam. Mirrors increase the intensity of the light and prepare it to leave the resonator. After leaving the resonator the beam must travel through a path made up of several cooled lenses until it reaches its destination. This travel results in a loss in power and quality for the laser beam.