Cnc Drill Line Ashford
The Advantage-2 CNC beam drill line with its powerful material handling support, meticulous measurement capabilities and high speed designs are ideal for tandem installations with any of Voortman' automatic sawing systems.
These drop-in serrated grippers help to secure base plates, flat bar, angle and other profiles that might have rounded edges that want to push away from the datum line
The Franklin HD145 (3) spindle-cNC drill is 44 inches wide. The HD-145 can lift beams of up to 750 lbs per feet. The high-performance spindle design allows drilling speeds of up to 2000 RPM. The rigid design of the spindle allows for very aggressive feed rates, up to 300 ft per minute. There are many material handling options available for the Franklin HD145, from 300 lbs to 750 pounds per foot.
The CNC Beam Drill Line was a huge hit with small- to medium-sized fabricators who produce both structural steel and other miscellaneous materials. More than 600 CNC Drill Lines have been installed since 2003. This amazing machine has made a significant impact on the lives of many steel fabricators.
The CNC Drill Line can not only process columns and beams, but also all steel profiles, including channel, angle and flat bars, base plates, RHS square and round.
The CNC Drill Line can not only lay out and drill your holes in any kind of steel profile in a fraction as long as it takes you to do manually using a mag drill but also marks your welded attachments. This eliminates the need for tape measures.
We at GSS Machinery are often asked by our customers what drill bits should they use – twist drill bits or insert bits? Our number one agenda is to ensure that our customers pursue the lowest cost per hole drilled, as this will make them more competitive and profitable. However it is important that they fully understand their options, Insert Drill Bit (Spade Drill Bit ) Advantages
Voortman service technicians do not often have to be present on your machine to address any issues you may have. Voortman technicians will be able operate your control with an internet connection. Voortman equipment features a Powerful Windowsr-based Siemens control. This allows for superior diagnostics and allows for increased productivity.
GSS Machinery will provide you with as many options as you need when drilling with your CNC Drill Line.
The CNC Beam Drill Line has been an immediate hit with the small to medium fabricator fabricating both structural steel and miscellaneous metals. Since it was introduced in 2003 more than 600 CNC Drill Line have been installed around the world, and this amazing machine has changed the lives of many a steel fabricator.
The CNC Beam Drill Line, which can be used to fabricate structural steel or miscellaneous metallics, was immediately a hit with small to medium size fabricators. Since 2003, more than 600 CNC Drill Lines were installed all over the globe. This incredible machine has transformed the lives many a steel fabricator.
Voortman is the only manufacturer of the CNC Drill Line for GSS Machinery. Voortman takes care of all aspects of the CNC Drill Line's installation, warranty, maintenance and repair. Voortman provides the service, but GSS Machinery can always be reached if required.
Voortman is the only manufacturer of the CNC Drill Line for GSS Machinery. Voortman takes care of all aspects of the CNC Drill Line's installation, warranty, maintenance and repair. Voortman provides the service, but GSS Machinery can always be reached if required.
After the Voortman technician has completed calibrating and installing your machine, he will spend some time with your operators to teach them our simple but thorough training program. The following training will be provided to your operators:
The maximum concrete aggregate size will determine the spacing between bars in a beam. Between the bars, the minimum spacing can be between 50 and 75 mm.
Wood beam size for 25-foot span: As a general rule, the size of a wood beam or lumber joint should be 2x16. This is 16' from the centre of any residential building, projects, or construction. The beam's depth is 400mm (16'), and beam width is either 50 mm or 2.
The width/depth ratio (W/D), is the ratio of the bankfull bankfull width to the average depth of the bankfull canal. This ratio is crucial for understanding how energy is distributed within a channel and how sediment can be moved by various discharges.
The beam will fail at its bottom if the cantilever beam material has lower compressive yield strengths than the tensile yield strengths. The beam may also fail if its tensile yield strength falls below the required level.
Channels, or C-beams, are used when the flat back side of the web is mounted to another flat surface. This allows for maximum contact. Sometimes they are welded back-to-back to create a non-standard I beam.