Ficep
The Advantage-2 CNC beam is a powerful tool for material handling and precision measurement. This machine can be used in tandem with any Voortman’s automatic sawing systems.
Voortman technicians will complete the installation and calibration of your machine. After that, he'll spend time with operators and guide them through our comprehensive training program. Training will be given to your operators in:
Voortman's service technician will finish calibrating your machine and spend time with you, your operators. He will then take them through our easy-to-understand training program. You will receive instruction in:
CNC Drill Line can import DXF file and can use them for processing 3-D shapes provided the steel is detailed according specific rules. You might need to adjust some of these rules to match the details you are currently using. This process may not be as seamless as 3-D modeling software.
These drop-in stainless grippers allow you to secure base plates or flat bars, angle, or other profiles that might have rounded edges and want to push away the datum line.
Developed by Voortman, Raptor 3D CAD/CAM Software takes CNC innovation further by enabling users to program faster and more accurately. Inspect, modify and export part information directly within the 3D platform. This coupled with Voortman CNC technology means maximum capacity for fabricators.
GSS Machinery wants to give you as many options possible when drilling with your CNC Drill Line and any other CNC Beam Drill Line.
MultMaster is an extension to the Roller Feed measurement systems. It can perform small-sized cuts that would otherwise need manual positioning. This accessory automates the processing of short residual sections on a Voortman drill-saw tandem system, allowing for quick and easy material processing.
AC Unit Mounted to Electrical Cabinet - This unit is mounted on the cabinet’s High Power (480v side). It is near the location where drives are mounted. This option allows for quicker heat dissipation, while keeping the cabinet temperature steady. The most significant heat contributors inside an electrical cabinet are all the servo motors for all axes.
We at GSS Machinery are often asked by our customers what drill bits should they use – twist drill bits or insert bits? Our number one agenda is to ensure that our customers pursue the lowest cost per hole drilled, as this will make them more competitive and profitable. However it is important that they fully understand their options, Insert Drill Bit (Spade Drill Bit ) Advantages
The CNC Drill Line is very simple to operate and most of our Avenger operators were the men doing layout on the floor. No prior computer knowledge is necessary, and full training is provided at the time of the installation
We have used more than 1,000 CNC Drill Line and Angle Lines in the world. We have found that even an experienced operator who has never programmed before can use the machine efficiently in less than half an day.
These drop-in serrated graspers are ideal for securing base plates, flat bars, angle, and any other profile that may have rounded edges that push away from the datum.
Programming the CNC Drill Line, even for operators without any previous computer or CNC experience is straightforward and intuitive.
There are some guidelines and rules. According to IS 456:2000, the minimum thickness of RCC beams should not be less that 9'' (230mm). Therefore, RCC beams must be at least 9'' (230mm thick). Concrete grade M20 with T12 as tension bar at bottom and T10 at the top is recommended.
STRENGTH. Steel is harder than aluminum, despite being more susceptible to corrosion. Although aluminum has a higher strength in colder climates, it is more susceptible to scratches and dents than steel. Steel is less susceptible to warping or bending due to heat, weight, force or heat.
Never drill a hole less than 1' from the floor joist or beam end. Also, avoid drilling within 1 foot of the beam's top on a post or support column. 2. The 1/3/3 rule applies to overhead spans.
It is considered a girder if it is the main structural support made up of smaller beams. The Code does not specify the dimensions that will distinguish a beam and girder.
To reduce the chance of the beam escaping from the concrete column, the development length is required. It acts as a support member for the concrete column's reinforced beam.