Cnc Drill Line July

Voortman machines have been the global leaders in structural steel fabrication technology. Voortman machines are a key part of steel fabricators' competitive advantage. They can optimize tonnage and maintain a high level of quality. Advantage-2 CNC beam drilling is the heart of any structural steel fabrication shop. This machine is a core component of a high-speed multi-spindle, relentless caride drilling. Advantage-2 is one of the most profitable lines in the steel industry. This drill line is built from heavy steel and will last for many years. Thanks to the roller feed design of the infeed/outfeed, the Advantage-2 can run profiles from end to end without any stop in production. Every year, hundreds of fabricators around the world run hundreds of thousands and tons of steel through their Advantage-2s.

The Franklin HD145 (3) spindle-cNC drill is 44 inches wide. The HD-145 can lift beams of up to 750 lbs per feet. The high-performance spindle design allows drilling speeds of up to 2000 RPM. The rigid design of the spindle allows for very aggressive feed rates, up to 300 ft per minute. There are many material handling options available for the Franklin HD145, from 300 lbs to 750 pounds per foot.

It doesn't matter if a CNC drill isn't able to position a steel fabricator to be competitive in the steel fabrication market. The Advantage-2's ability to process technical files with intelligence, speed and precision is what makes it so special. Each drilling axis can operate with three five-station tools changers. Signoscript's underside scriber and Signomat's part stamping unit can be attached to this drill axis. Part information is preserved even after galvanizing, blasting, and painting. Minimizing shop errors? Check. Advantage-2 uses carbide tooling to drill more holes and is more aggressive than any other drill. High torque drilling instruments have a thicker and more aggressive cut which removes more chips from each rotation. This drill can remove beams, channel and angle tubes as well as flat bars. Advantage-2's processing window is 44 inches wide by 18 inches high.

Z-Reader Probe-The Z-Reader Probe is a device that maps the location of the surface. It can be programmed or manually controlled. It can be disabled while cutting, and it can be pulled out of harm's reach. It can be activated to verify the surface at each pierce prior to cutting, or to drive surface mapping for the entire part before cutting begins. It is used to initialize or zero the device to the desired surface and then tracks or accumulates the difference between that zeroing effort.

Programming the CNC Drill Line is simple, even when done manually. Peddimat is the machine programming program and most operators can learn to program most parts in less that an hour. Of course practice makes perfect. But, the best way is to program the machine directly from a 3D CAD drawing. This should be done in software such as StruMis, ProSteel 3D and SDS/2. These files can be imported directly to the machine. After selecting the part to process, the operator clicks on the Cycle Start Button.

Z-Reader Probe- This probe maps the surface's location. It can be operated manually and programmatically. The option is removed from danger and is not active while the cutting process is underway. It can be used for surface mapping or to verify surface at each point before the cutting process begins. It is responsible for initialization, or zeroing the device on the surface at beginning of a program. From there it tracks the difference or accumulates them.

At GSS Machinery we are committed to providing you as many options as possible with regard to drilling with your CNC Drill Line or any other CNC Beam Drill Line.

CNC Drill Lines are among the most economical CNC beam drill lines available. They allow fabricators to win more work and earn more margin.