Cnc Drill Line Dead

Voortman exclusively designed and built the CNC Drill Line to fit GSS Machinery. Voortman oversees all aspects of the CNC Drill Line, including warranty and service. Voortman acts as the service provider. GSS Machinery will always assist should the need arise.

To ensure smooth operation and low maintenance, our beam drill machine machines come with linear guides and central lubrication. A 4-station tool changer is included in each coordinate system. It allows it to drill/mill, scribe/counter sink or tap as necessary. The tools can also be changed easily mid-operation. An arm attached to the rack and pinion on the feed conveyor is used to position the beam while it passes through the drill. Our steel beam drill lines are much more accurate that friction roller machines.

Our beam drill line machines feature central lubrication and linear guides. This ensures smooth operation and less maintenance. Each coordinate system has a 4-station tool changer that allows it to drill, mill and scribe as well as counter sink or tap. It can also swap tools mid-operation without any disruption. The positive beam positioning system consists of an arm attached on the feed conveyor to a rack-and-pinion system. This allows the beam to be positioned more precisely as it passes through the drill line.

GSS Machinery staff and personnel have been a tremendous support to me. Without them, I believe we wouldn't be in the position we find ourselves in in the steel fabricating markets.

We have seen more than 1000 CNC Drill Lines, and angle lines installed all over the world. We found that the average operator can program a machine in half the time, even if they have never programmed one before.

Voortman’s 24 hour tech support center can resolve 90% of your support issues. An extensive network of 50+ Voortman personnel is stationed across North and South America.

Our beam drill machines have central lubrication, a cooling system, and linear guides to make them easier to use and require less maintenance. Each coordinate system includes a 4 station tool changer. This allows it drill, mill/scribe, counter sink or tap as many times as required. Additionally, tools can be swapped easily during operation. Positive beam positioning is an arm that attaches to a rack on the conveyor. This allows the beam position to be more precisely controlled as it moves through a drill line.

Automatic Edge Finder – The edge finder can be used manually (Jogging method & Screen Buttons), programmatically, or fully automated (dedicated programme). This option adjusts offsets and program rotation to match orientation and location on the cutting board.