Cnc Beam Drill Line Hook

CNC Beam Drill Line has a 100% hydraulic motor, which makes maintenance and parts extremely affordable. CNC Drill line was created to be used around the globe and uses components only from major manufacturers. However, many of the parts can be purchased locally. Voortman has all the parts in stock for next-day delivery to the USA. In many of our overseas countries, we offer local support and service.

The CNC Beam Drill Line not only lays out and drills all your holes in any steel profile in a fraction of the time it takes you to do it manually with a mag drill, but it also lays out the marks for all your welded attachments, virtually eliminating the need for a tape measure.

AC Unit Mounted to Electrical Cabinet - This unit is mounted on the cabinet’s High Power (480v side). It is near the location where drives are mounted. This option allows for quicker heat dissipation, while keeping the cabinet temperature steady. The most significant heat contributors inside an electrical cabinet are all the servo motors for all axes.

Auto Stand-Off is currently defined as surface stand-off. It should not be confused with vector standoff in 5-axis mode. Auto stand-off currently works on a changing surface. It adjusts vertically based upon the angle of the Axis. This means that five (5) axes are taken into consideration during calculations. However, this is not the same thing as tool vector standoff. You can change the vector standoff while the machine runs manually by pressing buttons on the screen.

Auto Stand-Off – This is currently defined to be surface stand-off and not to be confused with vector stand-off in 5-axis mode. The current auto stand-off is based on a changing surface and will adjust vertically based on the angle of the “A” Axis, so there is five (5) axis taken into account during the calculations, but this is not the same as the tool vector stand-off. There is the ability to do the vector stand-off change while the machine is running manually with buttons on the screen.

The Franklin HD145 (3) spindle CNC drill, with 44-inch width capacity. The HD-145 handles beams up to 750 lbs per foot. The hi-performance spindle design provides drilling capabilities up to 2,000 RPM. This rigid design provides extremely aggressive feed rates up to 300 surface feet per minute. The Franklin HD145 can be provided with several material handling packages from 300 lbs per foot, to 750 lbs per foot.

Voortman will install and calibrate your machine once he is done. Then, he will meet with your operators and take them through the simple but comprehensive training program. They will be trained in:

The ability to mill copes speeds up project completion times tremendously. Coupled with the Advantage-2 user-friendly Raptor 3D CAD/CAM software enables the operator to program parts quickly. Inspect, modify and export part information directly within the 3D platform. The biggest advantages of the Advantage-2 drill has been probably the scribing and the ability to mill slots, large lifting holes. I mean this really kind of sets this machine apart. With the scribing we're able to put piece marks and layout lines, center points. I mean having that flexibility to use it when we want to and make that decision has been really great.