Material
Remember that checking for bends or bows in the tube using traditional methods can take five to seven seconds before cutting starts. The traditional method of touch sensing is not as accurate as it was. This means you must compromise productivity in order to achieve accuracy. Even though it may seem like a lifetime in the age fiber laser cutting technology, tube work isn't as easy as sheet metal.
You should also consider the shortcase-sized modules of the fiber laser. They provide redundancy. The resonator will not shut down completely if one of the modules has a problem. The fiber laser works in redundant mode so that the other modules can provide more power temporarily to sustain the down module's needs until they can be repaired. Field repairs are possible, however. Sometimes the fiber laser can produce less power while repairs are being made. An issue with a CO2 Resonator will cause the entire system to fail.
The subject of material loading and unloading automation is well established in sheet laser cutting with a multitude of solutions and complexity. In contrast, tube laser cutting systems equipped with vertical storage systems, for tubes and section bars, capable of handling bars automatically and allowing for unmanned production changes have only been available for a few years.
The wavelength of fiber lasers is 0.06 microns. This difference is 10 times smaller than the wavelength of CO2 lasers. A fiber laser beam produces a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 light source. However, a CO2 light source is much more likely be absorbed by reflective materials. Fiber laser cutting machines have the ability to cut brass, copper, or other reflective materials. Note that CO2 laser light that reflects off the material could not only damage the machine's optical system, but also the entire beam pathway. This risk is eliminated when the beam path is made of fiber-optic cable.
This is the most effective solution to any tube section. Tubes upto O6" (152.4 mm).2D cutterCO2 or fibre laser
Most metal fabricators have a strong understanding of what fiber laser cutting technology has done for flat sheet processing, but just what has the fiber laser done for tube cutting? Quite a bit, actually.
Gulf States Saw & Machinery Co., Inc.'s team of experts can work with you to develop innovative designs that can improve aesthetics, increase functionality and deliver new products to market faster.
StarFeed is an automatic loader/unloader that is compatible with the StarCut Tube laser cutting machine. Available in sizes S and S, this combination allows for automated dry or wet cut of tubes from 1-200 mm in diameter. StarFeed L is capable of storing up to 48 tubes. Its sensor-controlled gripping unit avoids damage. The result is a large increase in productivity.
The worthwhile laser tube cutting machine: the TruLaser Tube 3000 fiber is economical even when it is not being fully utilized. Thanks to its reliability and easy of operation, it is perfect for first-time users or as a supplementary machine.
The wavelength of fiber lasers is 1.06 microns. This is 10% less than the wavelength of a CO2 laser beam. The fiber laser emits a beam with a shorter wavelength that is more easily absorbed and reflected by reflective materials than a CO2 laser. Fiber laser cutting machines are able to cut brass, copper and other reflective materials. Be aware that the CO2 laser beam can damage not only the machine's lens but also the entire beam path. This risk is eliminated by using a fiber-optic cables for the beam path.
Due to the high power needed to create a CO2 Laser, it is less efficient than a fiber-laser. Also, the large chillers that are required to make CO2 lasers work require more power. You are using less power due to the fiber laser's wall plug efficiency exceeding 40 percent. This means that you also use less of your floor space in high-demand areas.
Medical device manufacturing is possible with precision and maximum uptime using Coherent Laser Systems for cutting, welding drilling, texturizing and marking.
Discover how Cambus Medical uses the Coherent StarCut Tube laser-powered tube cutting machine and Select Laser Welders to create business success.
The images of product are used for illustration purposes only. They may not represent the exact product. Gulf States Saw & Machinery Co., Inc. reserves every right to make changes to product specifications and images without prior notice.