Mazak Tube Laser

Tube Lasers Cutting Systems Houston Tx

At one time many thought that fiber lasers could be used only for thin materials. The CO2, with its larger wavelength, created enough kerf during the cutting of thick materials that enough space was allowed for material removal; the fiber laser couldn’t produce the same kerf or results with thicker materials. But that has been addressed in recent years with collimating technology that can produce a wider fiber laser-generated beam that creates materials separation and room for material removal in thick materials. And since the beam width is switchable, the machine can use the narrower beam to process thin materials, which allows for faster processing of different-sized materials on the same fiber laser cutting machine.

Some things are difficult to see until you have a closer look at the fiber laser operating. Fiber lasers have a larger power density than CO2 laser beams because their beam diameter is typically one-third that of CO2 beams. This allows fiber to cut more quickly and also allows it pierce better. This allows the fiber to cut intricate shapes with sharp edges and leaves a smaller beam size. Imagine that a fiber can cut the company logo from a tube with spacing of 0.035 in between its letters; a CO2 laser is incapable of doing this.

Laser Tube Cutting Machine Alibaba

StarFeed is an automated unloader/loader for StarCut Tube laser cutters. It is available in two sizes: S and L. These combination options allow fully automated dry and wet cutting of tubes up to 20 mm diameter. StarFeed L can store up to 48 tubes, and it even supports the processing of oval tubes. Its sensor-controlled gripping unit avoids damage. This results in a significant increase in productivity.

Leaders in the manufacture of advanced laser-cutting solutions including CNC controls and automation systems.

Tube Laser Cutting Systems Working

Tube Laser Cutting Systems Working

Some things can be quite obvious. The fiber laser "generator", as it is called, is smaller than traditional CO2 resonators. The fiber laser is actually created by banks and modules of diodes. They can be assembled into a compact module with a power range of 600 to 1,500 watts. A number of modules are combined to make the final powered receiver, which is often the size of small filing cabinets. The light is amplified and channeled through fiber-optic cabling. The fiber-optic cable transmits the light exactly as it was before. This ensures that there is no loss of quality or power. Then, it is adjusted and focused according to the material being cut.

We have the best solutions for laser tube cutting. Learn how lasers can reduce entire processes and increase the number of parts that you can make.

Yongli

Traditional tube features are time-consuming. FabLight makes it quick and easy to create exactly the look you desire.

This machine can be used for processing XXL-sized tubes. This machine, which is a solid state laser, can be used in many ways to make tubes and profiles.

Yongli

Tube Laser Cutting Systems Job Work Near Me

Fiber lasers are capable of cutting thin materials with high speeds. Fiber lasers are very efficient and low in power consumption, but require very little maintenance. Laser cutting technology is able to cut steel, stainless and aluminum as well as nonferrous metals such copper and brass.

Learn how the Coherent StarCut Tube laser-powered cutting machines and StarFiber laser cutters helped NPX Medical to gain a competitive advantage in stent manufacturing.

Tubing

Some things are quite noticeable. The laser “generator” on a fiber laser is much smaller when compared to a traditional CO2 resonator. In fact, the fiber laser is created by banks of diodes that are put together in a briefcase-size module that can range in power from 600 to 1,500 watts. Multiple modules are spliced together to create the final powered resonator, which is typically the size of a small filing cabinet. The light generated is channeled and amplified through fiber-optic cable. When the light exits the fiber-optic cable, it is the same that is was upon being generated with no loss of power or quality. It is then adjusted and focused for the type of material to be cut.

Metal fabricators know a lot about what flat sheet processing has involved with fiber laser cutting technology. But, what does the fiber laser do for tube cutting? A lot actually.

Tube Lasers Cutting Systems Houston Tx
Yongli
What is the most common type of laser

It's one-third of a full 20 foot (240") tube. Therefore, it is convenient to make three stocks. This allows you still to buy full tube lengths, without having any wasted material.

Micrometric Ltd uses its versatile Coherent StarCut tubes laser cutting machine in order to produce speedy and precise medical and aerospace products.