Trumpf
Many believed fiber lasers could only work with thin materials. Because CO2 has a longer wavelength, it created enough material kerf to permit material removal. Fiber lasers can't produce the same level of kerf and results with thicker materials. This has been corrected by collimating tech, which can produce a wide fiber laser-generated beam that allows for materials separation. It also makes it possible to allow for material removal in thicker materials. You can also switch the beam width so that the machine can process thin materials with the narrower beam. This allows you to process more materials in a shorter time.
The best tube laser cutting solution. Tubes upto O9.45" (220 mm)3D-cutting modeCO2 (or fiber laser)
Fiber lasers have a wavelength of 1.06 microns, which is 10 percent smaller than that of a CO2 laser beam. With its much smaller wavelength, the fiber laser produces a beam that is much more easily absorbed by the reflective material; a CO2 laser is much more likely to reflect off the surface of these materials. Because of this, fiber laser cutting machines can cut brass, copper, and other reflective materials. It should be noted that a CO2 laser beam that reflects off the material can not only damage the machine’s cutting lens, but also the entire beam path. Using a fiber-optic cable for the beam path removes this risk.
Even for XXL tubing, it is built for maximum productivity. This machine has a solid-state laser that can be used in a variety of ways to produce tubes and profiles from varying materials and wall thicknesses.
You can find the right technology to meet your needs. You have the option of either CO2 laser or fiber laser cutting systems depending on what materials you are working with and how much productivity and quality you desire.
Gulf States Saw & Machinery Co., Inc.’s tube laser manufacturing capabilities give our customers the ability to replace manual processes and optimize the cutting process.
Fiber solution for large-diameter tubes and profiles Tubes up O14" (355mm) 3D cutting modeFiber laser
StarCut Tube Laser SL is the best laser cutting system for complex medical devices, such as stents and aortic valve replacements.
Images of product may not reflect the actual product. Gulf States Saw & Machinery Co., Inc. reserves right to alter product specifications or images at any moment without notice.
Many applications are possible for processed tubes or profiles. There are many applications for processed tubes and profiles, whether in the automotive, furniture, architecture, petrochemical, or commercial vehicle building. Many industries have embraced laser-assisted manufacturing of tubes and profiles. This allows for a virtually unlimited range of components and unmatched design possibilities.
These machines have a rock-solid cutting platform (the SL uses a minerals cast base) and offer unparalleled precision. Contoured cutting accuracy is better than +/-5um. The choice between a fiber laser and the new Monaco USP allows fine cutting of any kind of metal or polymer.
A laser tube cutter machine does not come with standard material towers. Bundle loaders are the most efficient option for tube material handling. They feed one tube from each bundle to the tube laser through a singularizing device. This type of feeding mechanism is not suitable for open profiles such as channels or angles, since they are interlocked while inside a bundle and can't be released easily. Step loaders are used for open profiles. They sequence each section into the machine one at a while maintaining the correct orientation.
StarCut Tubes SL is a laser cutting system that provides high accuracy, superior reliability, as well as high performance for cutting complicated medical devices such stents.
PowerLineC CO2 laser-based systems that can precision drill, cut, scribing mark, and emboss many non-metals like glass and organic material.