Tube Laser Cutting Systems Engineer

Monaco high power femtosecond lasers provide excellent edge quality for micromachining. They also offer improvements in scientific application like three-photon microscopicscopy.

Many of Gulf States Saw & Machinery Co., Inc.'s tube-laser-cutting systems incorporate intelligent machine functions, such as intelligent monitoring, setup, cutting, and other functions. These automated functions make it easier to operate and increase machine efficiency. These lasers are versatile and can be used in many industries.

Many thought fiber lasers could only be used for thin materials at one time. Due to its longer wavelength, CO2 produced enough kerf for the cutting of thick materials so that there was enough room for material removal. However, the fiber laser wasn't able to produce the same kerf in thicker materials. The problem was solved in recent years by collimating technology which allows for a wider beam of fiber laser-generated light that can be used to create materials separation. Because the beam width can be switched, the machine can use a narrower beam to process thin material. This makes it possible for the machine to process different-sized materials faster on the same fiber laser cutter machine.

Whether it is the manufacture of specific equipment for gyms, or smaller, multifunctional exercise machines for domestic spaces, tubes are the fundamental building blocks. This is why tube processing technologies, such as bending and laser cutting, are so widely used in this sector.

Imagine that you have to position a through-hole on top of a tube. It must be centered on the tube's actual dimension. It will be more difficult to center the tube if it is bent. This is the reality of tube fabrication.

With Lasertube systems, you can create new applications or improve existing ones, entering new industrial sectors and increasing profit margins.

Tubes are and will continue to be used throughout the entire industry, including in system and mechanical engineering as well as furniture construction. New design possibilities have been opened by lasers. This means that more and more designers are utilizing the benefits of laser-cut tube and profile cutting, which is driving up demand. TruLaser Tube machines offer all-round solutions in the field of laser tube cutters.

Fiber lasers are virtually maintenance-free, demonstrate superior wall plug efficiency when compared to traditional CO2 laser cutting machines, can cut reflective materials, and offer precise cutting. They also are faster than CO2 machines when cutting certain metal thicknesses. However, speed is relative when it comes to cutting tube. The real time savings comes from speeding up the processing time of the tube and producing finished parts.