Material Finishing Machines Hair

No matter the number of steps involved, each step should be done independently. This means that you can't do deburring and polishing at the same moment. Instead, first deburr, then polish. If more than one step are needed, the steps must all be done in ascending ordinal order of smoothness.

Flat parts make you feel lost? Flat parts, like washers, pose one of the most difficult challenges in centrifugal-barrel finishing. Parts tend to stick to the barrel and wick together so that only one side can be deburred. To solve this problem, you can add glass bead blasting medium to the centrifugal drum finishing process. The beads protect the parts from sticking to each another and to the barrel. Glass beads can be used for parts that have a tendency to cup together.

Gulf States Saw & Machinery Co., Inc. has assembled a collection of finishing solutions ideally suited for the digital realm. From cutting to creasing to folding, Gulf States Saw & Machinery Co., Inc. has your digital finishing covered. And when you’re ready to move up to single-pass slitting, cutting, creasing, scoring, and perfing look no further than the Aerocut digital finishing solutions line. These all-in-one finishing systems will take your digital production to the highest level.

Are you frustrated by flat parts Flat parts such washers pose the biggest challenge in centrifugal barrel finish. They can stick to or wick together on the barrel sides, so only one side is deburred. Add glass bead blasting media into the centrifugal-barrel finishing process. The beads coat parts so that they won't stick together or to the barrel. Glass beads are also great for parts that may be difficult to separate.

Our machines have a longer life expectancy, lower costs, and require less maintenance for finishing or deburring.

Get our experience in centrifugal barrel finishing to your advantage and send us a batch of parts today for testing! Get a free assessment by contacting us.