How much power does a 50W fiber laser use
Fiber lasers shine in engraving applications. It can mark and etch metals with incredible speed.
Boss Laser ships FM-Desktops pre-assembled. They offer technical support on-site for their customers.
Auto-focus adjusts the position of the laser head along the Z-axis according to the 3D camera data.
Raycus 50W Fiber Laser can be used to etch and mark aluminum at 90 degrees angles. It uses 100% of the laser's power.
If most of your production is cutting thin metals up to 25mm, then a fiber laser cutter will be ideal.
You will need a 30W, 50W, or 50W fiber laser to increase the engraving area to 7.87"x7.87" or 11.81".
Fiber lasers shine in engraving applications. It can mark and etch metals with incredible speed.
Boss Laser ships FM-Desktops pre-assembled. They offer technical support on-site for their customers.
Laser machines with a fiber laser source use high precision field lenses to increase the energy density and collimate the laser beam at one point.
The laser arm is held by the support column (Z-axis). The laser focus can also be adjusted by moving Z-axis with the height adjustment knob.
Fiber lasers can be used to engrave many applications. The wavelength range of fiber lasers is 780nm – 2200nm.
When it comes to using the machines, laser cutters and plasma cutters are very similar. The software they use to cut metal is also remarkably similar. So if you have a plasma and want to switch to laser for it’s speed, it will be a very fast learning process.
Mitsubishi Laser designs, manufactures, and performance-matches every critical laser cutting component to the highest standards—in the most demanding environments. From compact, cost-efficient 2D workhorses that can reduce cutting time by 30%, even while using fewer resources, to full 5-and 6-axis systems offering unsurpassed utility and flexibility, today’s shops have all kinds of options for revolutionizing their production capabilities.
There are several laser power options available: 1000W to 1500W, 2000W to 2500W, 2500W to 3000W. These fiber laser machines are fast and precise, with a cutting speed of 35 meters per minute. Laguna Tools also offers machines that have an enclosed area for reducing light pollution.
Fiber lasers only have a narrow focal point so it is difficult to use them for cutting thick materials. A CO2 laser would be the best choice.
High speed IPG fiber laser cutter is type of high power laser metal cutting machine with 12000W power supply for commercial use of thick metal fabrication including stainless steel, carbon steel, mild steel, tool steel, brass, copper, aluminum, alloy, and rare metals in industrial manufacturing.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.
Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.
Thin carbon fiber mat can be cut with some fraying - but not when coated. The laser can cut or etch. The laser can cut materials such as wood, paper, cork, and some plastics.