Wide Range
You can mount Muse Pandora under an adjustable work desk, as shown below, for effective engraving when using such lenses.
F-theta is the used for laser modules. High energy uniformity lens, narrow focus spot and low attenuation.
Plasma, on the other side, can efficiently cut any metal up to 80mm thick and 3 inches in diameter. When cutting thicker materials, plasma can begin cutting much faster than laser.
It is free-of-charge software that can be used under Microsoft Windows XP/Windows 2000, WIN 7, WIN8, WIN 10, OS.
MCWlaser PRO can be used on steel, stainless steel and silver as well as alloys, aluminum, and other metals.
It is a pulsed fibre laser with a wavelength 1064 nm. It is expected to last for approximately 25,000 hours.
You can mount Muse Pandora under an adjustable work desk, as shown below, for effective engraving when using such lenses.
F-theta is the used for laser modules. High energy uniformity lens, narrow focus spot and low attenuation.
Amazon does not offer a return policy. However you will be eligible for a replacement within the 30-day period.
It can engrave on metals at a maximum speed up to 11,760 ipm. It can mark images and fonts on metal surfaces, both smooth and rough.
A 30W fiber Laser can engrave on stainless Steel at a 90deg angle, with a speedy speed 3,543 ipm.
They also provide a 30-day return policy and 2-year parts warranty for all the components and the fiber laser in FM-Desktop.
It is free-to-use software that can be used on Microsoft Windows XP or Windows 2000, WIN 7, WIN8, WIN 10 OS.
The 30W fiber-laser can engrave in stainless steel at a angle of 90 degrees and at speeds of up to 3,543 ipm. This laser uses 100% of its power.
Fiber lasers are pumped with laser light from the source by high-power laser diodes that stimulate the active medium.
When you need to reproduce or alter the dimensions of a piece that’s already been made, the best place to start is with the piece itself. That, and a high-accuracy 2D or 3D inspection machine.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.
Laser fiber cutting machine
Fiber optic laser cutters are intended to cut metal at high speeds and with pinpoint accuracy. These machines, which have been on the market for more than 20 years, also use a fiber laser power source.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.