Auto-focus automatically adjusts laser head position on the Z-axis based on data received from the 3D cam.
The laser beam generated is amplified, then fed to the cutting head via a flexible optical fibre.
Since the working medium adopted by the laser generator is in the form of an optical fiber, its features are affected by the transition properties of the optical fiber. The pump light entering the fiber generally has multiple modes, while the signal photoelectric may have multiple modes. Different pump modes have different effects on different signal modes, making the analysis of laser generators and amplifiers more complicated. The doping distribution in the fiber also has a great impact on the laser generator. In order to make the medium have gain characteristics, working ions (that is, impurities) are doped into the fiber. In general, working ions are evenly distributed in the core. However, the distribution of pump light of different modes in the fiber is non-uniform. Therefore, in order to improve the pumping efficiency, the ion distribution and the pumping energy distribution should be as close as possible. When analyzing the laser generator, in addition to the general principle of the laser generator discussed above, it must also consider its own features, introduce different models and adopt special analysis methods to achieve good analysis results.
LaserWorks or RDWork software is used to control the machine. These software can be downloaded free of charge from the respective websites.
FSLmuse Pandora requires 254mm lens, 330mm lens, and 420mm lens to work in open settings. Only then the laser can effectively focus on the material.
The laser source is at the heart of any fiber laser. A fiber laser does not use any gaseous medium like a CO2 one.
The laser used is a laser pulsed fiber laser having a wavelength of 1064nm. It can last approximately 25,000+ hours.
Contact after-sales via phone, email or social media.
It will meet the speed and power requirements for aluminum, steel and black acrylic as well leather and granite.
However, fiber lasers are expensive and if you need a cheap laser engraver you will have to consider going for diode type lasers.
Fiber lasers are revolutionizing laser metal cutting industries with their low maintenance costs, high cutting efficiency and lower cost.
Fiber lasers are much more efficient than CO2 lasers and use less energy. They also operate at a shorter wavelength, between 780 and 2200nm, which gives them a higher absorption rate.
Gulf States Saw & Machine Co., newest laser machine combines our top-of-the-line technology and our latest features in a compact desktop format, with a 30-watt fiber option for marking metals and engineered plastics.
The air outlet above the chiller must be at least 1250px away from the obstacle, and the side air inlet must be at least 500px away from the obstacle.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.
Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.
Thin carbon fiber mat can be cut with some fraying - but not when coated. The laser can cut or etch. The laser can cut materials such as wood, paper, cork, and some plastics.