Companies that produce custom metal parts and metal fabrication shops can greatly improve their production efficiency with fiber laser cutting machines.
Fiber laser is a new type of laser cutting technology in the world that outputs a high-energy density laser beam and gathers it on the surface of the part to instantly melt and vaporize the area on the part irradiated by the ultra-fine focus spot and move the spot through the CNC controller. Irradiate the position to realize automatic cutting. Compared with the bulky gas laser and solid laser, it has obvious advantages. It has gradually developed into an important candidate in the fields of high-precision laser cutting, lidar systems, space technology, laser medicine and other applications.
Triumph's 30W desktop fiber-laser gives you two lenses. One lens gives a 4.3"x4.3", the other gives a 7.8”x7.8” engraving surface.
The closer the M2 value is to 1, the tighter the focus spot gets, the more laser energy is delivered at the laser spot. It helps process thicker materials with thin deep wells.
All types of materials can be cut by laser machines. It all depends on the type of laser machine that you have. The CO2 laser machine cannot cut through reflective metals such as aluminum, copper, or brass. They can, however, cut through non-metallic materials such as wood and plastic.
With the latest in artificial intelligence (AI) and gas reduction technology, the new GX-F ADVANCED Series of two-dimensional fiber lasers delivers more power while using less nitrogen.
Fiber lasers can be expensive so if you are looking for a low-cost laser engraver, you should consider diode lasers.
Just know that the running cost of plasma is lower than laser. In general, it cost about 15/hr to run plasma cutting machines. It takes about 20/hr to run a laser machine.
Plasma on the other hand can effectively cut any kind of metal up to 80mm thick or 3 inches. Interestingly, plasma can start cutting faster than laser when cutting thicker materials.
This basically means that when working on materials such as metals which reflect laser beams, fiber laser radiation will absorb at a higher rate than laser generated by CO2 lasers.
Some PVC-based acrylics can release toxic fumes if they are heated. It is better that you check the chemical compositions before engraving.
Boss Laser sells CorelDRAW 2020 software as an add on to its FM-Desktop engraver.
Raycus 50W laser fiber can etch aluminum at a 90 degree angle and mark it with 100% laser power.
You can use a Raycus 50W laser to engrave stainless steel at a 90deg angle and with a speed up to 3,540 ipm.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.
Marking and engraving are improved by high peak power and nanosecond pulses. The increased power and improved beam quality result in cleaner cut edges and faster cutting speeds. Fiber lasers are also used in material processing, telecommunications, spectroscopy, medicine, and directed energy weapons.
Options for payment The average laser can cost between $50,000 and $250,000, making it a significant asset to a business.