Fiber Laser Cutting Machine 2000w
Raycus 50W Fiber Laser can be used to etch and mark aluminum at 90 degrees angles. It uses 100% of the laser's power.
The air filter must be removed and cleaned regularly. Serious blockage of the air filter will cause the chiller to malfunction.
Boss Laser provides lifetime technical support for their customers through their engineers and technicians.
Fiber lasers have eliminated the need for mirrors or beam paths to align with them.
As per data from the 3D camera, the auto-focus feature adjusts the laser's position along the Z axis automatically.
The air outlet above the chiller must be at least 1250px away from the obstacle, and the side air inlet must be at least 500px away from the obstacle.
So you need to use a 30W or 50W fiber laser for upgrading the engraving area to 7.87" x 7.87" or 11.81" x 11.87".
Some PVC-based acrylic emit toxic fumes during lasering. It is a good idea to research the chemical compositions and materials you will be engraving.
After you've logged in to RetinaEngrave, v3.0, your first job can be started. All this can be done in less than 30 minutes.
Affordable metal sheet & pipe fiber laser cutter is a type of automatic CNC laser metal cutting system not only for metal sheets and metal plates with different thickness, but also for metal pipes and metal tubes with different shapes.
Our machines can easily cut stainless steel, brass as well as aluminum and brass without the fear of back reflections. These fiber lasers machines will greatly reduce maintenance and operational costs.
From small fabrication shops to massive lights-out operations, our laser automation experts will work with you to determine the right combination of machines, storage towers, product carts, and break-in stations.
People who use plasma always tell me they must watch over their plasma cutter. They say the plasma machine can start cutting wrong or get out of control (imagine seeing a plasma machine head swirling around in crazy motion?)
FSL Muse Pandora can raster- and vector-engrave metals, such as steel, nickel and copper, silver, gold, stone, or leather.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.
Applications for the 50 Watt Fiber Laser Deep Engraving Machine:
Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.
Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.