Fiber Laser Cutting Machine Aluminum
Although fiber lasers may be solid-state lasers they are not as powerful as diode or other lasers.
Its laser source module has a footprint of 8.3" x 14.9", and the engraving machine module has a work area of 13.8" x 22".
Fiber Lasers, manufactured by Gulf States Saw & Machine Co. provide consistent, accurate metal cutting. They can also be used to significantly improve production and quality.
In laser engravers, a mirror galvanometer is a series of mirrors in the laser head that move extremely fast to manipulate the path of the laser. A small rotation of 10 degrees at the head is enough to produce 1 3/4" inch of movement at 10 inches. It is also used to trace out the laser paths before engraving or cutting.
Auto-focus automatically adjusts laser head position on the Z-axis based on data received from the 3D cam.
Plasma can cut any metal that has conductive properties. Laser machines have difficulty with reflective metals like copper, aluminum, and brass.
The laser energy delivered at the laser spot will increase the closer the M2 value to 1. It can process thicker materials through narrow deep wells.
FSL Muse Pandora is able to raster or vector engrave aluminum, steel and nickel as well as silver, titanium, copper, and stone.
The generated laser beam is then amplified and fed to the cutting head using a flexible optical fiber.
However, fiber lasers tend to be quite expensive. If you need a cheaper laser engraver, then you might consider using diode type lasers.
Plasma can also cut ceramic and glass. Because they are electrically conductive, plasma cannot be used to cut wood and plastic.
What it means is, when working with materials like metals that reflect laser beams, they will absorb fiber laser light at a much higher rate than laser light generated by CO2 lasers.
When using fiber laser machines to cut projects, it is necessary to learn the use and maintenance skills, in order to better exert the effectiveness of the equipment and maximize the efficiency of the equipment. 1. Check the steel belt frequently to ensure the tension. Otherwise, if something goes wrong during operation, people may be injured and serious death may result. The steel belt looks like a small thing, but the problem is still a bit serious. 2. Check the straightness of the track and the verticality of the machine every six months, and find that it is abnormal and timely maintenance and debugging. Without this, the effect of cutting may not be very good, the error will increase, affecting the cutting quality. This is the top priority and must be done. 3. Use a vacuum cleaner to suck off the dust and dirt in the machine once a week. All electrical cabinets should be closed and dustproof. 4. The guide rails should be cleaned frequently to remove dust and other debris, to ensure that the equipment racks are cleaned frequently, and lubricating oil is added to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, the machine can move better during cutting, cut more accurately, and the quality of the cut product will improve. 5. If any damage is found in the process of using the machine, it must be replaced in time, which is not only a type of protection for the machine itself, but also ensures that the machine always maintains an ideal cutting effect.
It means that when working with metals that reflect laser beams they absorb fiber laser light much faster than the CO2 laser light.
Marking and engraving are improved by high peak power and nanosecond pulses. The increased power and improved beam quality result in cleaner cut edges and faster cutting speeds. Fiber lasers are also used in material processing, telecommunications, spectroscopy, medicine, and directed energy weapons.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.