Fiber Lasers Machinery Zone
MCWlaser PRO split-type machines are those that have both the laser source or the engraving device in separate parts.
This fiber laser can give a repetitive precision of ±0.0001" with a beam quality of less than 1.1 M2.
Gulf States Saw & Machine Co.'s FM1212-50S uses a Raycus50W solid-state laser fiber source with a life span of 100,000 hours.
However, fiber lasers can be very expensive and you may need a laser engraver that is affordable.
FM-Desktop can be used as a mobile engraving machine. It has dimensions of 33.5"x24.5". It has a 4.33" x 4.33", marking area that is perfect for small projects, such as laser engraving knives.
Boss Laser has CorelDRAW 2020 available as an optional add-on for the FM Desktop engraver machine.
If you stare at the fiber laser cutting machine for a long time, it will cause very serious damage to the retina of the eye. All operators must wear laser goggles. Do not operate and observe with eyes exposed. In the cutting path of the laser equipment, it is necessary to avoid the position of any part of the body, so as not to accidentally cause unnecessary injury.
Boss Laser provides the CorelDRAW 2020 version as an add-on at a discounted rate with the FM-Desktop engraver machine.
You can also use Photoshop, CorelDRAW and AutoCAD to create advanced designs.
If they have enough power, fiber lasers can cut through reflective materials. They can basically cut through any metal with enough power. They are only limited by the thickness of their cuts.
Gulf States Saw & Machine Co. offers an EZCAD2.0 laser control program with the Gulf States Saw & Machine Co.'s FM1212-50S laser engraver.
Boss Laser sells CorelDRAW 2020 software as an add on to its FM-Desktop engraver.
Fiber lasers are solid state lasers. However, they are very different from diode and fiber lasers. This is because of the difference in their capabilities.
Once you access control to the machine through RetinaEngrave v3.0, you can start your first job. You can do all this in about 30 minutes.
Marking and engraving are improved by high peak power and nanosecond pulses. The increased power and improved beam quality result in cleaner cut edges and faster cutting speeds. Fiber lasers are also used in material processing, telecommunications, spectroscopy, medicine, and directed energy weapons.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.