Operating Costs
Before the new machine is packed, the water storage tank is emptied. Please make sure that the water tank is filled with water before turning it on, otherwise the pump will be easily damaged. When the water level of the water tank is below the green (NORMAL) range of the water level gauge, the cooling capacity of the chiller will slightly decrease. Please ensure that the water level of the water tank is within the green (NORMAL) range of the water level gauge. It is strictly forbidden to use circulating pump to drain water.
EZCAD 2.0 is free-to-use software that can be used on Microsoft Windows XP or Windows 2000, WIN 7, WIN8, WIN 10 OS.
The laser source module measures 8.3"x14.9" and the engraving machine module measures 13.8"x22".
You should ensure that safety glasses are designed to block 1064nm laser light when you purchase them.
Other engraving area options available are 6.9" x 6.9", 5.9" x 5.9", 4.3" x 4.3", and 2.6" x 2.6". You can choose them depending on your operational requirement.
This modular material-handling system brings nearly unlimited growth potential to shop floors of all sizes.
Contact them via phone, e mail, or social media for after-sales assistance
Refraction bends the light in an optical laser. An optical fiber cable carries the light through a transparent, silica-free core. The core is coated with cladding. Cladding is another layer of silica doped in additional materials to lower the refractive index. Because they have a different refractive Index, the light will become refracted at their core-clad interface.
Fiber lasers are changing the industry in laser metal cutting with their low maintenance and high cutting efficiency.
Fiber lasers are the best option for laser cutting/engraving aluminum and brass workpieces.
With the increase in the power of laser cutting lasers, laser cutting is developing from light industrial thin plate processing to focusing on industrial thick plate cutting, and due to the improvement of high-power laser beam mode and the application of 32-bit microcomputers, it is a fiber laser cutter equipment. High speed and high precision create favorable conditions.
MOPA fiber laser is a special type of fiber laser that allows for greater control over the pulse width and frequency parameters. This laser can be used to color laser engravings on metals.
A 30W fiber laser can be used to engrave stainless steel dog tags at a 90 degree angle. It uses 70% of the laser's power.
Gulf States Saw & Machine Co. FM1212-50S is not assembled. It comes in modular form and can be attached by following the instructions.
Marking and engraving are improved by high peak power and nanosecond pulses. The increased power and improved beam quality result in cleaner cut edges and faster cutting speeds. Fiber lasers are also used in material processing, telecommunications, spectroscopy, medicine, and directed energy weapons.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.