Mass finishing can be done either dry or wet with a centrifugal bar tumbler. Wet processes employ a liquid cleaner, lubricant, or abrasive while dry processes don't. Each barrel holds approximately 50-80% capacity.
Our in-house lab allows us to create custom solutions for our customers.
A centrifugal barrel tumbler can perform mass finishing either wet- or dry. Wet processes use liquid lubricants, cleaners, or abrasives, while dry processes do not. Each barrel is filled to 50-80% capacity with the following elements.
The 2000-Series machines were designed with higher production requirements in mind. They are designed to handle such applications as deburring, slag grinding, calibrating/dimensioning, edge radiusing, paint/surface preparation, finishing/polishing or a combination of these applications.
Use of the correct tumbling media is crucial for centrifugal barrel finishing. The wrong media, particularly the wrong geometry, can double the cycle time for parts. Using cones or cylinders for tumbling media when not appropriate can slow down processing time significantly.
We have clients that rely on our metalworking machinery in many industries including:
Contact us today to find out more about our dry metal machines.
Mass finishing with a centrifugal barrel tumbler can be performed either wet or dry. Wet processes use a liquid lubricant, cleaner or abrasive, and dry processes do not. Each of the four barrels is loaded to roughly 50-80% of capacity with the following elements:
One medical device manufacturer faced two major challenges when designing a citric passivation system. First, they had to perform a water-break test on the parts after cleaning them. Then, they had to proceed with passivation. They couldn't use an automated passivation system. Data tracking was required for quality control purposes. Semi-Automated [...]
The detergent is essential. While you may think the cleaning compound was meant for the metal parts of the tumble media, it is actually necessary for its use. The cleaning compound helps keep pores open in the tumbling medium by providing lubricity. If the pores of the tumbling medium become glazed, cutting will cease to work. The metal parts will become black. The soap was not used to make the parts black.
Gulf States Saw & Machinery Co., Inc. will provide you with a complete, worry-free package. Gulf States Saw & Machinery Co., Inc. mass production equipment and media is made in house. Our own trained service personnel, application technicians, spare parts, recycling of waste water and reline services make Gulf States Saw & Machinery Co., Inc. mass manufacturing equipment a robust and sustainable option for customers.
Gulf States Saw & Machinery Co., Inc. tabletop folders offer the perfect blend of speed, precision, & ease of usage, making them ideal for small offices, schools, as well as corporate environments. Automatic programmable folders store fold programs and can be set to run at the touch-of-a-button.
Use of a deburring machine also contributes to worker safety, since it reduces the risk of repetitive motion injury such as carpal tunnel syndrome associated with deburring and polishing by hand. The centrifugal barrel machine is far more ergonomic than handwork. While centrifugal tumblers do require operators to load each barrel manually, the high speed of the machine makes up for this labor intensity.
For centrifugal barrel finish, it is essential to use the correct tumbling medium. The wrong media, and especially the wrong geometry can increase the cycle time of parts. Processing time can be significantly slowed down by using cones and cylinders for tumbling media if they aren't needed.
Finishing processes can be used to improve the following characteristics: appearance, adhesion or wettability, solderability, corrosion resistance, tarnish resistance, chemical resistance, wear resistance, hardness, modify electrical conductivity, remove burrs and other surface flaws, and control surface friction.
Surface Finishing Machine has a metallic bowl that holds media, water, and finishing compounds.
Finishes are applied at the end of a construction or manufacturing process to form the final surface of an element. They can protect the element they finish from impact, water, frost, corrosion, abrasion, and other elements, as well as be decorative.