Fig. 12 — An effect of nugget diameter on the tensile shear loadbearing capacity of weldment. Fig. 14 — An effect of electrode indentation depth on the tensile shear loadbearing capacity of weldment. and Zhou, Y. 2008. Microstructure and mechanical properties of resistance spot welded advanced high strength steels. Materials Transactions 49(7): 1629-s to 1637-s. 4. Curtze, S., Kuokkala, V. T., Hokka, M., and Peura, P. 2009. Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates. Materials Science and Engineering A 507(1–2): 124-s to 131-s. 5. Chen, H. C., Era, H., and Shimizu, M. 1989. Effect of phosphorus on the formation of retained austenite and mechanical properties in Si-containing low-carbon steel sheet. Metall. Trans. A 20(3): 437-s to 445-s. 6. Jeong, W. C., Matlock, D. K., and Krauss, G. 1993. Observation of deformation and transformation behavior of retained austenite in 0.14C-1.2Si-1.5Mn steel with ferrite-bainite-austenite structure. Mater. Sci. Eng. A 165(1): 1-s to 8-s. 7. Matsumura, O., Sakuma, Y., and Takechi, H. 1992. Retained austenite in Fig. 13 — An effect of nugget height on the tensile shear loadbearing capacity of weldment. 0.4C-Si-1.2Mn steel sheet intercritically heated and austempered. Trans. ISIJ Int. 32(9): 1014-s to 1020-s. 8. Bhattacharyya, T., Singh, S. B., Dasa, S., Haldara, A., and Bhattacharjeea, D. 2011. Development and characterization of C–Mn–Al–Si–Nb TRIP aided steel. Mater. Sci. Eng. A 528(6): 2394-s to 2400-s. 9. Bhadeshia, K. D. H. 2002. TRIPassisted steels. ISIJ Int. 42(9): 1059-s to 1060-s. 10. Sherif, M. Y., Garcia Mateo, C., Sourmail, T., and Bhadeshia, H. K. D. H. 2004. Stability of retained austenite in TRIP-assisted steels. Materials Science and Technology 20(3): 319-s to 322-s. 11. Bleck, W. 2002. Using the TRIP effect — The dawn of a promising group of cold formable steels. Proceedings of the International Conference on TRIP-Aided High Strength Ferrous Alloys 1: pp. 13–24 Druck und Verlag, Mainz. 12. Sun, X., Stephens, E. V., and Khaleel, M. A. 2008. Effects of fusion zone size and failure mode on peak load and energy absorption of advanced high strength steel spot welds under lap shear loading conditions. Engineering Failure Analysis 15(4): 356-s to 367-s. 13. Jimenez-Melero, E., Van Dijk, N. H., Zhao, L., Sietsma, J., Offerman, S. E., Wright, J. P., and Van Der Zwaag, S. 2007. Characterization of individual retained austenite grains and their stability in lowalloyed TRIP steels. Acta Mater. 55: 6713-s to 6723-s. 14. Kou, S., 2003. Welding Metallurgy, 2nd ed., A Wiley-Interscience Publication. 15. Emre, H. E., and Kaçar, R. Development of weld lobe for resistance spot-welded TRIP800 steel and evaluation of fracture mode of its weldment. Int. J. Adv. Manuf. Technol., DOI 10.1007/s00170-015- 7605-1. 16. Zhang, H., and Senkara, J. Resistance Welding: Fundamentals and Applications, 2nd ed., CRC Press, Taylor & Francis Group. WELDING RESEARCH 84-s WELDING JOURNAL / MARCH 2016, VOL. 95 Fig. 15 — An effect of nugget size ratio on the tensile shear loadbearing capacity of weldment.
Welding Journal | March 2016
To see the actual publication please follow the link above