B1
Finishes
Finishes
Finish Terminology
End Grain
End grain surfaces and softer areas of the wood may accept more stain
and often appear darker than other surfaces. This is a natural reaction
when finishing wood products and potential variances
cannot
be
controlled.
Joint Lines
Since wood is in a constant state of expansion and contraction, visible
lines are normal at the joints on the cabinet face frames and doors. This
does
not
weaken the finish or the strength of the joint.
Telegraphing
Show through or “telegraphing” of wood characteristics may happen
when paint is applied to any specie of natural wood. These characteristics,
such as open grain, pin holes, knots and mineral streaks, may be visible
through the paint. Telegraphing may happen on doors, face frames,
moldings, decorative end panels or other decorative enhancements made
of natural wood. Please consider this when selling any of our finishes that
feature paint as the base technique, including paint with glaze and vintage
techniques.
Note:
Individual veneer doors vary in absorption of finishes and glaze hang
up. Also, veneer door styles, which are usually simple door designs, may
not
contain as much glaze hang
up as ornate door designs. Therefore, it is
recommended that a sample veneer door be viewed in the desired finish
before placing a full kitchen order.
Note:
Based on independent testing, discoloration will occur to doors,
drawers and cabinet parts after prolonged exposure to tobacco smoke.
This is especially noticeable on white and other lighter finishes. However,
finish discoloration due to exposure to smoke is
not
under warranty.
Warping, Cracking & Proper Humidity
As a natural characteristic, all wood products contain moisture. Changes
in temperature and humidity affect the moisture content in wood,
which causes wood to expand or contract. Over time, this expansion
or contraction can cause warping and joint cracks to occur, potentially
causing permanent deformations, in wood cabinetry.
To help prevent excessive movement in your wood cabinetry, we
recommend maintaining a controlled environment of 70 to 75 degrees
Fahrenheit and 30% to 50% humidity in the areas where your cabinetry
is stored or installed. Environmental conditions
cannot
be controlled
by Masco Cabinetry and the effects of the movement in wood is
not
considered to be a manufacturing defect and will
not
be considered a
reason for replacement.
Note:
Wood products, including cabinet doors and face frames, are
typically affected by environmental conditions. Color variation over time,
as well as normal movement due to wood’s expansion and contraction
is part of the natural beauty of wood. This normal movement may cause
hairline cracks in the finish surface at the joints and is considered a
normal characteristic of semi
opaque or painted finishes. This will
not
be
considered a reason for product replacement.
See the doors section of this book for door specie information and
descriptions
Standard Stain Finishes
(Available as Standard)
Stain Finish Process
Stained finishes truly showcase the natural beauty and characteristics
inherent in each individual wood species. Based on the stain color chosen,
a toner may be applied to the wood to equalize natural sap levels. The
stain color is applied and hand-rubbed to ensure full and equal color
coverage for doors and drawer fronts.
Finish availability may vary by door style. See Door Styles section for stain
availability
Amaretto
A rich golden brown finish
C66C
Cherry
C66O
Oak
Dusk
A sheer, rich grey stained finish that enhances the beauty of the woodgrain
C64M
Maple
Hazelnut
A golden stained finish with yellow overtones
C68M
Maple
Kona
Deep semi-transparent dark brown
C63M
Maple
C63O
Oak
Natural
Two coats of clear, colorless topcoat on unstained wood
C61H
Hickory
C61M
Maple
C61O
Oak
Pecan
A warm, rich brown stained finish with deep brown undertones and black
overtones
C65C
Cherry
C65M
Maple
C65O
Oak
Sable
Rich medium brown
C53M
Maple
Sedona
Rich, traditional cherry finish
D75M
Maple
