Material Finishing Machine Bissell

Centrifugal barrel finishing systems are industry workhorses and are used with many types of metals, including brass, aluminum, steel, stainless steel, chrome, and titanium. Note that this type of system does not deburr plastic parts, because plastic is too pliable for this process.

Vibratory tumblers shake a bowl or tub by using a side to side motion. This is similar to rock polishing tools that many of our children used to play with. Finalizing occurs by rubbing the parts against one another.

Barrel tumblers use rotary movement with abrasive tumbling media to create sliding friction. Imagine putting rocks into a barrel and rolling it down a hill, and you have the general idea. The deburring or polishing occurs as the parts slide against the media and other parts.

A polishing machine smoothens the product's rough edges, increasing its technical and aesthetic value...

A deburring machine can also help worker safety. It lowers the risk of repetitive motion injury, such as carpal tunnel syndrome, that is associated with polishing by hand. The use of a centrifugal barrel machines is more ergonomic than manual labor. Centrifugal tumblers can be slow and require manual loading. However, this is compensated for by the machine's speed.

One medical device manufacturer faced two major challenges when designing a citric passivation system. First, they had to perform a water-break test on the parts after cleaning them. Then, they had to proceed with passivation. They couldn't use an automated passivation system. Data tracking was required for quality control purposes. Semi-Automated [...]