Page 69 - 2020 Allstar Performance Parts and Equipment Catalog
P. 69
COOLING
Radiator Honeycomb Radiator Caps
Honeycomb screen mounts to front Higher cooling system pressure raises the
of radiator to protect from rocks and boiling point of coolant to reduce the risk of
debris. Secure directly to radiator overheating. Standard size caps fit 2-1/8"
using ALL30085 mounting kit, sold O.D. x 3/4" deep necks unless otherwise ALL30129
separately. 19" x 26". noted. Recovery system caps allow coolant
ALL30158 ..... 1/2" Thick to exit the cooling system into an overflow
ALL30159 ..... 1" Thick or recovery bottle as coolant heats and
expands. As the system cools, recovery ALL30136
system caps will draw coolant back in to
Universal Mounting Kit ALL30085
keep the cooling system full. Non-recovery
Mounting kits are commonly used to mount electric fans, oil system caps allow coolant to exit the
coolers, transmission coolers or honeycomb screen system, but do not draw coolant back into
directly to a radiator. Kits include four 8" nylon the system. ALL30128
mounting bolts with washers, rubber
spacer blocks and retaining nuts. Part No. Description Pressure
Bolts are pressed through the fins of *Non-Recovery Radiator Caps
the radiator to mount accessory. ALL30134 Stant Round 18-22 PSI
ALL30135 Stant Round 21-25 PSI
ALL30128 Stant Round 28-32 PSI
Radiator Shaker Screen ALL30160
*Recovery System Radiator Caps
Commonly used on Dirt Late
Models, universal shaker ALL30132 Stant Round 16 PSI
screen is mounted in front of ALL30133 Stant Round With Lever 16 PSI
the radiator on most dirt cars. ALL30130 Stant Round With Lever 18-22 PSI
Unit includes black powder ALL30137 Stant Octagon 21-25 PSI
coated aluminum frame, screen, ALL30131 Stant Round With Lever 21-25 PSI
1/2" x 32" cross rod, springs ALL30136 Round 22-24 PSI
and retaining clips. Frame ALL30129 Round 29-31 PSI
dimensions are 17" tall and 25" wide. ALL30138 Stant Octagon 38-42 PSI
*Small Diameter Recovery System Radiator Caps
ALL30124 Stant Round Small Dia. (32mm I.D., 16mm deep) 16 PSI
Sprint Car Radiator Rock Screen ALL30163 ALL30125 Stant Round Small Dia. (32mm I.D., 16mm deep) 19-21 PSI
Aluminum rock screen helps to ALL30126 Stant Round Small Dia. (32mm I.D., 16mm deep) 28-32 PSI
protect radiators from heavy *Warning: High pressure radiator caps are made for use on race vehicles only.
rocks and mud. Mounting tabs Do not use these caps on passenger vehicle cars with stock type radiators. It is
recommended to pressure test the complete cooling system to the maximum
are integrated into the frame level of pressure indicated on the cap. Failure to test cooling system to the proper
for quick and easy installation pressure prior to installing the cap may result in damage to the cooling system
to the front air box. Measures and/or bodily injury.
20-1/2" wide x 12" tall and
weighs just under 1 lb. Quick turn springs are included.
Billet Aluminum Radiator Cap
ALL30139
Stainless Wire Screen
Polished billet aluminum cover is permanently
Use screen to protect radiators, oil coolers pressed onto a 16 lb. recovery style radiator
or other items. Size referenced is the cap for enhanced appearance within any engine compart-
approximate opening of the screen. ment. Cap is a suitable choice for most street driven
5/64" (.025" Wire Diameter) vehicles.
ALL22260 ..... 12" x 36"
ALL22262 ..... 36" x 36"
5/64" Radiator Tank Heating Pad ALL76420
1/8" (.035" Wire Diameter)
ALL22265 ..... 12" x 36" Fasten pad directly to the side of radiator tank to help
ALL22267 ..... 36" x 36" add heat to your engine on cool nights. 2" x 15" high
ALL22268 ..... 36" x 48" 1/8" temperature silicone heating pad externally pre-heats
coolant in the radiator and reduces overall warm up time.
3/16" (.047" Wire Diameter)
ALL22270 ..... 12" x 36" Note: Additional pads are located in the Engine section for oil pan and oil
ALL22272 ..... 36" x 36" 3/16" tank applications to add additional heat to the engine before start-up.
ALL22273 ..... 36" x 48"
www.allstarperformance.com 67
