|
Netlist (IPC-D-356/A) |
  
|
|
Netlist (IPC-D-356/A) |
|
This command is used to export a netlist.
Command Sequence
1. Select menu: File | Export | IPC Netlist. The Export Netlist Wizard dialog box appears.
2. Verify the Export Netlist options you want to use, and press "Next".
Note: For description of each option, see below: Export Netlist Options
3. Select the netlist file to create.
Note: If you would like to always export your files to a specific folder, you may define the "Export Folder" in the Fab3000 Settings Dialog.
4. Click "Ok" to begin exporting your netlist file.
5. Once export netlist is complete, a Status & Import log are available for your review. If Fab3000 encounters any errors or warnings during export, they will be displayed here.
6. Click button "Finish" button to exit.
Export Netlist Options
Netlist Format:
|
Choose export netlist format: IPC-D-356, IPC-D-356A formats. |
Method:
|
Choose point method to use: All Points or End Points Only |
Sides:
|
Determine Side to use: Top Only, Bottom Only, Top and Bottom |
Assign Unused Nets:
|
Include Unused nets |
Output Adjacency Info: |
Include Adjacency Info.
|
Adjacency Distance: |
Choose Adjacency distance.
|