Navigation:  Job Editor Menu > Tools > Convert to > Flash (Custom Aperture)

Converts selected objects to a custom aperture definition.

 

Command Sequence

 

1. Select all the objects that you want  to convert to a customer aperture.

 

Note: This function requires that you select objects before proceeding.

Note: For more information about object selection see Viewing & Selection Basics

 

2. Select menu: Tools | Convert To  | Flash (Custom Aperture)

 

3. Enter in the name you want to use as reference for this custom aperture.  You can also determine if you want FAB 3000 to replace the selected objects with the new customer aperture; or by selecting "All" FAB 3000 will search for all similar object groups and replace them with custom apertures.

 

4.  Fab3000 will now create a new custom aperture, and adding it to the Aperture Table.

 

Note: Nothing has changed in the active job. Fab3000 has simply constructed a new custom aperture based from the selected objects

Note: The new custom aperture is now current, and may be added, by using the command:  Add | Flash

Note: Fab3000 is very intelligent and will recognize objects with a composite attribute and construct them with dark or clear fields (like a donut).