|
Scale |
  
|
|
Scale |
|
Scale selected objects.
Note: This function requires that you select objects before proceeding. When no objects are selected this command becomes de-activated in the menu.
Note: If you would like to scale an entire layer by different X & Y values, use: Scale X/Y
Command Sequence
1. Select Objects.
Note: For more information about object selection see Viewing & Selection Basics
2. Select menu: Edit | Scale. The Scale dialog box will appear.
3. Enter in the Scale Factor you want to use.
4. Check if you want to scale apertures or Uncheck to leave the same.
5. If the command is incorrect, you may Undo.