Controls and Meters

Overview

Included in the main Relay interface are Peak+RMS level meters (with support for up to 7.1.2 Dolby Atmos surround configurations), an output gain control, stereo pan, and stereo width controls. Relay also features an advanced controls panel that includes channel operations processing options (Phase, Swap, Mono), channel delay controls, and an adjustable high-pass filter.

Header Controls

The following controls are available in the header area of the Relay plug-in.

Plug-in Name Display

Displays the name of the current Relay instance. In some DAWs and NLEs, this name will be automatically set to the name of the track Relay is inserted on. This name will appear in source selection lists of compatible iZotope plug-ins. Click on the pencil icon or directly on the text to modify the name.

Bypass

Disables/enables Relay processing.

Options

Opens the options menu panel.

Help

Opens the Relay help documentation.

Main Controls

The following controls are available in the main panel of the Relay plug-in.

Output Gain

Adjusts the output gain of Relay. Output gain adjustments apply to all channels equally.

Width

Adjusts the amount of stereo widening applied to the output signal. Negative values result in a narrowing effect (-100% is equivalent to mono), positive values will increase the apparent stereo field. Only functional in stereo instances of Relay.

Pan

Pans the output signal to the left or right channel. Only functional in stereo instances of Relay.

Meters

Relay can be inserted on mono, stereo, or surround tracks. The meters display Peak+RMS level information for each channel. The text readouts above the clip indicators display current peak (top) and RMS (bottom) values. Clicking on the clip indicators will clear them.

Advanced Controls

The advanced panel can be expanded by clicking on the “Advanced” button.

The following sections describe the advanced controls available for: auditioning channel operations processing, adjusting left or right channel delay amounts, and enabling the adjustable high-pass filter.

Mono

Sums the left and right channels to a mono output signal. Useful for testing mono compatibility.

Only available in stereo instances of Relay.

Phase

Inverts the polarity of the input signal.

Only available in stereo instances of Relay.

Swap

Swaps the left and right input channels.

Only available in stereo instances of Relay.

Time Delay

Adjusts the delay for the left or right channel. When link is enabled, values will be modified relative to each other. Double-click on the text readouts to enter values manually.

Only available in stereo instances of Relay.

High Pass Filter

The following section describes the high-pass filter controls in the advanced panel.

Enable

The HPF can be enabled by clicking on the power button above the small filter display.

Slope

Change the slope of the high-pass filter by selecting a value from the dropdown menu below the filter power button.

The following Slope values are available in the High-pass filter:

• 12 dB
  
• 24 dB
  
• 48 dB
  
  

Cutoff Frequency

Click and drag the node or double-click on the text readout in the bottom right hand corner of the filter display to change the cutoff frequency.