Fiber lasers achieve high cutting speeds in thin material thicknesses. Additionally they boast low power consumption while requiring little maintenance.The special properties of this laser cutting technology enable applications insteel, stainless steel, aluminum, and non-ferrous metals, such as copper andbrass.
With a rock-solid cutting platform (the SL uses a mineral cast base) these machines offer the ultimate in precision, with contour cutting accuracies better than +/- 5 µm. A choice of fiber laser or the latest Monaco USP laser enables fine cutting of any polymer or metal.
Some things are difficult to see until you have a closer look at the fiber laser operating. Fiber lasers have a larger power density than CO2 laser beams because their beam diameter is typically one-third that of CO2 beams. This allows fiber to cut more quickly and also allows it pierce better. This allows the fiber to cut intricate shapes with sharp edges and leaves a smaller beam size. Imagine that a fiber can cut the company logo from a tube with spacing of 0.035 in between its letters; a CO2 laser is incapable of doing this.
Tube laser cutting offers the best solution for wide-ranging work. Tubes upto O 9.45 inches (240 mm).3D cutting modeCO2 and fiber laser
Even for XXL tubing, it is built for maximum productivity. This machine has a solid-state laser that can be used in a variety of ways to produce tubes and profiles from varying materials and wall thicknesses.
A few machinery manufacturers now use cameras to verify tubes. The cameras reduce the quality inspection to less than a second, as well as the number of required rotations. This allows the machine both to remain productive and accurate.
Another thing to consider is the modular design of the fiber laser. These modules are small enough to be carried in a briefcase and allow for redundancy. The resonator does not completely shut off if one module fails. The fiber laser acts redundantly in that it can produce more power temporarily in order to support the damaged module until repairs can take place. (This can, by the way can be done on the field). Other times, the fiber-resonator can continue producing lower power until repairs can take place. A CO2 resonator issue can lead to the complete resonator being down.
Secondary operations can be eliminated: A tube laser can easily cut a piece of material to the desired length, add holes or other cutout designs in one step. This eliminates the need for manual material removal. This allows you to maintain tight tolerances for more complicated fabrications. You can make parts from one continuous piece. This allows you to ensure they fit in one direction and is easy to assemble. Tube laser aluminum, carbon and stainless steel can all be tubed.
These images are intended to be used as illustrations and may not accurately represent the product. Gulf States Saw & Machinery Co., Inc. reserves all rights to modify product specifications and images at any time.
It is important to remember that traditional ways of checking for twists and bows can take up five or seven seconds, before cutting can begin. Touch sensing can only be used for precision. It can seem that this is all a lot, but it's not the same as working with sheetmetal.
No need for multiple vendors and orders to be coordinated. Gulf States Saw & Machinery Co., Inc. has the ability to manage everything, including material procurement and past delivery.
The wavelength of fiber lasers is 1.06 microns. This is 10% less than the wavelength of a CO2 laser beam. The fiber laser emits a beam with a shorter wavelength that is more easily absorbed and reflected by reflective materials than a CO2 laser. Fiber laser cutting machines are able to cut brass, copper and other reflective materials. Be aware that the CO2 laser beam can damage not only the machine's lens but also the entire beam path. This risk is eliminated by using a fiber-optic cables for the beam path.
StarCut Tube's tube-cutting laser machine StarCut Tube provides the highest precision and contour cutting accuracy, at a range of +/-5um.
With Lasertube systems, you can create new applications or improve existing ones, entering new industrial sectors and increasing profit margins.
Laser cutting pipe is the best way to achieve repeatable and precise cutting in applications where the precision of the cut itself is important.
Laser tube cutting is a method and technique for cutting tubes, structural shapes, or channels. These items will be cut to the required length during the process. It can also make holes or designs in tubing. It is a precise cutting method.
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.