Tube Laser Cutting Machines

Tube Laser Cutting Systems Repair Near Me

NIT uses a Coherent Laser Cutting Machine to Vertically Produce Nitinol and Other Metal Components with outstanding precision and edge quality.

TruLaser Tube3000 fiber: The laser tube-cutting machine that is worth the investment is the TruLaser 3000. This is an economical and reliable laser tube cutter. This machine is great for both first-time users and as an add-on.

Machining —

Cambus Medical uses Coherent StarCut Tube and Select Laser Welders laser-powered tubes cutting machines to create business success.

Fiber lasers are 10 percent shorter than CO2 laser beams in wavelength. Because of its shorter wavelength, fiber lasers produce a beam that is easier to absorb by reflective materials. A CO2 laser's wavelength is less likely to reflect off these surfaces. This allows fiber laser cutting machines to cut brass, bronze, and other reflective material. A CO2 laser beam that reflects on the material can damage not only its cutting lens, but the entire beam path. This risk can be eliminated by using fiber-optic cables to guide the beam.

Bodor Tube Laser Cutting Machine

This is your easiest route to tube laser cutting. Tubes as large as O 4,72" (120mm).2D cutter laser

The subject of material loading and unloading automation is well established in sheet laser cutting with a multitude of solutions and complexity. In contrast, tube laser cutting systems equipped with vertical storage systems, for tubes and section bars, capable of handling bars automatically and allowing for unmanned production changes have only been available for a few years.

Bodor Tube Laser Cutting Machine
Motorsport Racing

Motorsport Racing

Gulf States Saw & Machinery Co., Inc. provides a wide range solutions when it comes processing tubes, pipe, and structural metal. Gulf States Saw & Machinery Co., Inc. tube lazers are not only superior in laser-cutting, but they also offer additional processing capabilities to benefit fabricators.

The fiber laser does not require as much maintenance. The fiber laser doesn't need to be cleaned as often as a CO2 laser cutter machine. The fiber laser does not require any preventive maintenance as long as it has access to clean chiller water and that the filters are regularly replaced.

Metal

The CO2 resonator is much larger and requires more energy, as electricity is introduced to a combination of gases to produce the laser beam. Mirrors help the light gain in intensity, preparing it to exit the resonator. After exiting the resonator, the beam must travel through a path comprising several cooled mirrors until it reaches the lens. This travel causes a loss of power and quality in the laser beam.

We haven't talked about cutting speed, you may have noticed. You can cut up to 500 inches per hour on a tube but it's not always possible. The main focus of laser tube cutting is how long it takes to load the tube, index it so that it's in the right spot for cutting, then pierce and slice it. Laser tube cutting machines have a slower cutting speed than they do with parts.

Industry
Industry

We have the best solutions for laser tube cutting. Learn how lasers can reduce entire processes and increase the number of parts that you can make.

Many thought fiber lasers could only be used for thin materials at one time. Due to its longer wavelength, CO2 produced enough kerf for the cutting of thick materials so that there was enough room for material removal. However, the fiber laser wasn't able to produce the same kerf in thicker materials. The problem was solved in recent years by collimating technology which allows for a wider beam of fiber laser-generated light that can be used to create materials separation. Because the beam width can be switched, the machine can use a narrower beam to process thin material. This makes it possible for the machine to process different-sized materials faster on the same fiber laser cutter machine.

How thick can a fiber laser cut

Fitness equipment must be built with the highest standards of design, durability, usability, efficiency, and compactness.

Fiber solutions for large diameter tubes or profiles Tubes up O14 (355mm)3D-cutting modeFiber laser

Frequently Asked Questions

Pipe and tubing Cutting Procedures:

Rotate the pipe cutter around. Tighten the cutter slightly and rotate it around the pipe several times. Repeat until the pipe is severed by the blade. Steel pipe can be cut with a hacksaw, reciprocating saw, or steel-pipe tubing cutter.

What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.