Tubes, profiles and systems are everywhere. They're used for everything from mechanical engineering to system construction to furniture making. With the new possibilities that lasers present, designers are increasingly taking advantage of laser-cut tubes or profiles. This has led to a substantial increase in demand. TruLaser Tube machines are a complete solution for laser tube cutting.
The images of product are used for illustration purposes only. They may not represent the exact product. Gulf States Saw & Machinery Co., Inc. reserves every right to make changes to product specifications and images without prior notice.
The maintenance of a fiber laser is not as important. It doesn't need mirror cleaning or bellows checks like a CO2 Laser Cutting Machine. It does not need to be cooled with cold water, and air filters can be replaced regularly.
Fiber lasers are practically maintenance-free and have superior wall plug efficiency to CO2 laser cutters. They can also cut reflective materials and provide precise cutting. They can also be used to cut certain metal thicknesses faster than CO2 machines. Speed is relative when it involves cutting tube. It is possible to reduce the time required for tube processing and produce finished parts faster.
The product images used are only for illustration and may not be exact representations of the product. Gulf States Saw & Machinery Co., Inc. reserves a right to amend product images or specifications at any given time.
These laser-generating machines can produce up to 12 kW of power. The power of a laser tube cutter machine is typically 5 kW. This is because it cuts through the tube on the opposite side simultaneously.
TruLaser Tube3000 fiber: The laser tube-cutting machine that is worth the investment is the TruLaser 3000. This is an economical and reliable laser tube cutter. This machine is great for both first-time users and as an add-on.
Even for XXL tubes, this machine is designed for maximum productivity. This machine is robust and solid-state laser capable of processing tubes and profiles of a wide variety of materials and wall thicknesses.
The other factor to keep in mind is that the traditional method of checking for bows and twists in the tube can take up to five or seven seconds before cutting commences. With the traditional means of touch sensing, you have to trade productivity for accuracy. Again, in the age of fiber laser cutting, this can seem like a lifetime, but working with tube is not as simple as working with sheet metal.
Motion Dynamics is a major manufacturer of neurological sub-assemblies. They include steerable catheters as well as "pull wire" assemblies. Our StarCut Tube machines are used to precision cut key components.
With a laser tube-cutting machine, there are no standard towers. Bundle loads are the most efficient method for handling tubes. These loaders feed one tube per bundle into the tube cutter via a singularizing mechanism. This feeding method is not compatible with open profiles such as angles or channels. Because they interlock within a bundle, and don't allow for easy release, this type of feeding doesn't work. Step loaders are employed for open profiles. These machines sequence one section at a time and maintain the correct orientation.
A laser cutting machine can make a sheet of sheet metal in seconds. However, a laser tube cutting machine can achieve the same results. It is quite different from how it works.
The product images shown are for illustration purposes only and may not be an exact representation of the product. Gulf States Saw & Machinery Co., Inc. reserves the right to change product images and specifications at any time without notice.
The CO2 solution for large diameter tubes and profiles.Tubes up to Ø 14" / 24" (355 mm / 610 mm)3D cutting modeCO2 laser
from 3 months to 3 years
Glass CO2 laser tubes all degrade over time, with lifespans ranging from 3 months to 3 years. With use, the CO2 inside the tube degrades into carbon monoxide and oxygen. Overdriving the tube only accelerates this process and shortens its working life.
CO2 laser cutters are the most commonly used types of laser cutters because they are low power, relatively inexpensive, efficient, and can cut through and raster a wide range of materials.
What is the operation of a CO2 Laser? Modern CO2 machines typically generate the laser beam in a sealed glass tube filled with gas, typically carbon dioxide. A high voltage flows through the tube, interacting with the gas particles and increasing their energy, resulting in the production of light.