Tube Lasers Cutting Systems Of America

A job shop is only as diverse as the parts it produces. The same applies to those who operate a tube laser. Parts of different sizes can be found in one tube. Laser-cut parts as small as 2 inches must be unloaded by the machine. Each one can be as long as 15 feet. You must also be able unload the parts without damaging them. This can be difficult with soft metals like aluminum.

Many believed fiber lasers could only work with thin materials. Because CO2 has a longer wavelength, it created enough material kerf to permit material removal. Fiber lasers can't produce the same level of kerf and results with thicker materials. This has been corrected by collimating tech, which can produce a wide fiber laser-generated beam that allows for materials separation. It also makes it possible to allow for material removal in thicker materials. You can also switch the beam width so that the machine can process thin materials with the narrower beam. This allows you to process more materials in a shorter time.

With diameters ranging from 10 to 324 millimeters and pipe and profile lengths up to 12.5 meters, our system solutions offer the largest available selection for the flexible production of small and large series.

These laser-generating machines can produce up to 12 kW of power. The power of a laser tube cutter machine is typically 5 kW. This is because it cuts through the tube on the opposite side simultaneously.

A CO2 laser is more efficient than a fiber one because it requires less power to create. This means that large chillers for CO2 lasers will require more overall power. With a wall plug efficiency greater than 40%, the fiber laser resonance uses less power and takes up less space.

The high cutting speed of CO2 lasers is what makes them stand out. Their main application area is the medium-to-high range of material thicknesses. The laser beam cuts with high precision and is free from burrs. This allows the parts to be processed further without needing to be reworked.

Large diameter tubes and profiles can be cut with CO2. Tubes up O 14"/24" (355mm /610mm)3D Cutting modeCO2 laser

This is the easiest way to enter tube laser cutting. Tubes upto O 4,72" (120mm)2D CutFiber laser