Metal Fabrication
Laser tube cutting is our specialty. We provide the perfect solutions. You can learn more about laser tube cutting and how they can simplify the process while increasing the production of parts.
Tubes are the essential building blocks whether you're making equipment for gyms or for smaller, multifunctional exercise devices for your home. This is why so many technologies for tube processing, like bending and laser-cutting, are widely used within this sector.
There is no shortage of variety in any job shop. Parts of various sizes are not uncommon when you use one tube. The machine should be able unload laser-cut pieces as small as 2in. It can also be extended up to 15 feet, one after the other. It must also be in a position to lift the parts and not damage them. This is often a problem for aluminum or other softer metals.
Let's now look at the benefits associated with an automatic tube and section-bar storage system combined with a Lasertube Cutting system.
Laser fabrication solutions that meet your exact needs are available. They also offer process efficiency and quality for metal and non-metal fabrication.
This fully-automatic solution guarantees maximum productivity as well as rapid production changes. Tube O Range min. 0.47" (12 mm) - max. 6" (152.4 mm)3D cutting modeFiber laser
Learn how the Coherent StarCut Tube was used to cut stents and how StarFiber, a laser-powered cutting machine, helped NPX Medical.
The StarCut Tube SL is a complete turnkey machine that incorporates an fs-laser and is ideal for laser cutting complex metal shapes such as thrombectomy stent retrievers.
Micrometric Ltd uses its versatile Coherent StarCut tubes laser cutting machine in order to produce speedy and precise medical and aerospace products.
Remember that checking for bends or bows in the tube using traditional methods can take five to seven seconds before cutting starts. The traditional method of touch sensing is not as accurate as it was. This means you must compromise productivity in order to achieve accuracy. Even though it may seem like a lifetime in the age fiber laser cutting technology, tube work isn't as easy as sheet metal.
When fabricators think of fiber laser cutting technology they may first think high-speed. This might be true. However, speed is subjective when it comes to tube-cutting. It's not the cutting speed of the tube that matters, but rather the processing time.
Tube cutting also requires a weld seam. This material is rolled-formed and then welded together. These two points should be considered:
TruLaser Tube3000 fiber: The laser tube-cutting machine that is worth the investment is the TruLaser 3000. This is an economical and reliable laser tube cutter. This machine is great for both first-time users and as an add-on.
Many thought fiber lasers could only be used for thin materials at one time. Due to its longer wavelength, CO2 produced enough kerf for the cutting of thick materials so that there was enough room for material removal. However, the fiber laser wasn't able to produce the same kerf in thicker materials. The problem was solved in recent years by collimating technology which allows for a wider beam of fiber laser-generated light that can be used to create materials separation. Because the beam width can be switched, the machine can use a narrower beam to process thin material. This makes it possible for the machine to process different-sized materials faster on the same fiber laser cutter machine.