MCWlaserPRO is made to be used with metal materials such as steel, stainless, silver, bronze, alloy, aluminum, etc.
Fiber lasers have a small focal point, so using them to cut thick materials will be impractical. In such cases, a CO2 laser is the best option.
However, fiber lasers tend to be quite expensive. If you need a cheaper laser engraver, then you might consider using diode type lasers.
Zendesk hosts the support page. It features categorized sections that make it easy to find what you're looking for quickly.
Mirror galvanometers can be found in laser engravers. These mirrors move very fast to direct the laser's course. A simple rotation of 10 degrees at your head is sufficient to produce 1 1/2 inches of movement at ten inches. It is also used before engraving and cutting laser paths.
A galvo head can be added to allow for faster work. Galvo heads are commonly used in portable laser cutters.
Boss Laser provides pre-assembled FM-Desktops. They also offer on-site technical support to their customers.
With a 30W fiber laser, you can engrave on stainless steel at a 90° angle with a speed of ~3,543 ipm by utilizing 100% of the laser power.
Plasma can, however, cut any type or metal up 80mm thick or 3 inches thick. Plasma can start cutting quicker than laser when cutting thicker material.
AMADA engineered the 3kW ENSIS 3015 RI to include an innovative Rotary Index with the power and speed to efficiently transition from flat sheet to tube or pipe cutting. Incorporating fiber laser cutting technology helps users process a variety of tubing and pipe with greater speeds compared to a CO2 system.
It is capable of engraving at speeds up to 11,760 ipm. It can mark intricate fonts and images on uneven or smooth metal parts.
With the addition of a galvo head, they can also work at a very high speed. Galvo heads are typically used in portable laser engravers.
Boss Laser offers CorelDRAW 2020 as an add-on to the FM-Desktop machine.
The auto-focus feature automatically adjusts the laser head position along the Z-axis as per the data received using the 3D camera.
Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.