A fiber laser can be limited in both the size of the work-bed and the materials that you can cut.
The laser arm is held in place by the support column (Z axis). The height adjustment knob allows you to adjust the laser focal point by moving Z-axis.
The support column (Z-axis) holds the laser arm. The laser focus can be adjusted by moving the Z-axis using the height adjustment knob.
The laser beam is then amplified by a flexible optical fiber, which is fed to the cutting machine.
Fiber Lasers of Gulf States Saw & Machine Co. can provide precise and consistent metal cutting.
Triumph's 30W desktop fibre laser will give you two lenses. Both lenses have a size of 4.3" x4.3", while the other has a 7.8” x 7.8” engraving area.
Boss Laser will pre-assemble your FM-Desktop. They also offer technical support on-site to customers.
Fiber lasers only have a narrow focal point so it is difficult to use them for cutting thick materials. A CO2 laser would be the best choice.
The fiber laser has a repeatable precision of +0.0001" and a beam quality less than 1.1M2.
A special type of fiber laser known as MOPA fiber laser, provides greater control over pulse width and frequency parameters to produce color laser engravings on metals.
Not only will you achieve speeds that are multiple times faster, but technology for processing of thick mild steel has grown. Fiber laser isn’t just for thin material.
The beam quality of the 20W and 30W lasers is less than 1.5M2, while that of the 50W laser is less than 1.8M2.
6x12 high power fiber laser metal cutting machine with exchange pallet has faster cutting speed and high power laser source (1000W, 2000W, 3000W, 4000W, 6000W, 8000W, and up to 40000W) compared to other cutting solutions for commercial use, now the high power laser cutting machine for sale at affordable price.
However, fiber lasers are expensive and if you need a cheap laser engraver you will have to consider going for diode type lasers.
Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.
Power consumption is extremely low.
A 3000W fiber laser requires 10kW of power plus 5kW for a chiller, for a total of 15kW. $2,700 per year at a rate of 15kW per hour for 12 hours.
Fiber lasers leave unsightly marks on wood.
The goal of any marking or engraving project is to create a readable mark, whether by hand or machine. Uncontrolled absorption, on the other hand, results in an uncontrolled mark on the wood.