Emission
The ELEMENT is a big step for automation that thrives in even the tightest spaces. Maximize your machine's potential, even in a small shop with limited floor space.
Gulf States Saw & Machine Co. (FM1212-50S) uses a Raycus 50W, solid-state fiber laser. It has a lifetime of 100,000 hour.
Our machines are capable to cut steel, brass or aluminum with no back reflections. These fiber laser machine will significantly reduce your maintenance requirements as well as your operating cost.
When lasered, some acrylics made from PVC can emit toxic fumes. It is better to verify the chemical composition of any materials you intend to engrave.
The use of taller focal length lenses that require concentrated power to expand the engraving area is a good option.
To expand the engraving area, longer focal length lenses can be used. These lenses require high concentrated power and are taller.
Plasma can cut almost any material that is conductive. Laser machines are unable to cut reflective metals like brass, copper, and aluminum.
It is suitable for engraving on metals and can engrave at a maximum speed 11.760 ipm. It can mark complex fonts and images on both smooth and uneven metal parts.
Our machines can cut steel, brass and aluminum without any back reflections. These fiber laser machines can reduce maintenance and operating costs.
The beam quality for 20W, 30W, and 50W lasers is less that 1.5 M2, while it is less then 1.8 M2.
Metal fabrication shops and companies that manufacture customized metal parts can drastically improve their efficiency of production with our fiber laser cutting machines.
You can upgrade your machine with accessories such as a fume extractor or lenses.
As far as the material is concerned, the addition of the material itself or the coating on the material will produce components that are harmful to the human body at high temperatures, so it should be noted.
For expanding the engraving area, taller focal length lenses are used that require highly concentrated power.
Laser cutters cost between $13 and $20 per hour to operate. Water jet cutters cost between $15 and $30 per hour. Overall, the operating costs are comparable, and the total cost will be determined by your project.
Marking and engraving are improved by high peak power and nanosecond pulses. The increased power and improved beam quality result in cleaner cut edges and faster cutting speeds. Fiber lasers are also used in material processing, telecommunications, spectroscopy, medicine, and directed energy weapons.
To guide light, fiber lasers use an optical fiber cable made of silica glass. Because the resulting laser beam is straighter and smaller than with other types of lasers, it is more precise. They also have a small footprint, are energy efficient, require little maintenance, and have low operating costs.