Fiber Laser Cutting Machine Europe
However, fiber lasers tend to be quite expensive. If you need a cheaper laser engraver, then you might consider using diode type lasers.
The support column, or Z-axis, holds the laser arm. The height adjustment knob allows you to adjust the laser focal point by moving Z-axis.
The laser module can engrave with a repeatable precision of +-0.00039" and a life expectancy of 100,000+ hours.
However, fiber lasers are expensive and if you need a cheap laser engraver you will have to consider going for diode type lasers.
Using a Raycus 50W fiber laser, you can engrave in stainless steel at a 90° angle with a speed of ~3,540 ipm by utilizing 100% of the laser power.
It will be able to run at the recommended speeds and power rates for steel, aluminum, black acrylic and lexan as well as granite and other materials.
At the same time, the high-precision 3D robot fiber laser cutter has important strategic significance for improving the level of aerospace technology equipment. As the laser volume becomes smaller, the power increases and the auxiliary devices continue to improve for thick plate cutting and large format metal fabrication. The laser generator, power supply, host, control system and cooling circulation device are closely combined to form a complete set of compact laser cutter with small footprint and perfect function.
The support column (Z-axis) holds the laser arm. The laser focus can be adjusted by moving the Z-axis using the height adjustment knob.
FSL Muse Pandora's laser head has a mirror gauge that tracks out the laser path, gives an indication of how it will cut and provides a rough estimate of its cutting capabilities.
Boss Laser provides the FM-Desktop laser engraver in three laser configurations, 20W, 30, and 50W. You can pick them depending on what you need.
You can laser engrave stainless-steel dog tags with a 30W fiber light source at a angle of 90 degrees. This laser uses 70% of its power and allows you to work at speeds up of 708 ipm.
For engraving larger areas, you will need a 30-W or 50W laser fiber to upgrade to 7.87"x7.87", or 11.81"x11.87".
However, fiber lasers cost a lot so you'll need to look into diode-type lasers if you want a cheap laser engraving machine.
Fiber Lasers, manufactured by Gulf States Saw & Machine Co. provide consistent, accurate metal cutting. They can also be used to significantly improve production and quality.
Because the glass is transparent and the wavelength range of the automatic fiber laser cutting machine does not fall within the absorption range of the glass, it only absorbs a small amount of laser energy within the visible spectrum and cannot be cut by fiber laser.
Maximum material cutting thicknesses by 1000W fiber laser cutting machine: Carbon steel has a maximum thickness of 10mm; stainless steel has a maximum thickness of 5mm; aluminum plate has a maximum thickness of 3mm; and copper plate has a maximum thickness of 3mm.
Fiber lasers typically cost between $20,000 and $45,000.