building commissioning Hillsboro OR 97006

commissioning portland Beaverton OR 97007

Testing for sound and vibration in HVAC systems

Authorities Having Jurisdiction (AHJ) at the federal, state, and municipal levels have expanded their FSD testing code enforcement efforts beyond the healthcare industry to include the following:

The installation of fire and life safety (FLS) systems is an essential part of both new and existing building. Fire Smoke Dampers (often abbreviated as FSD) are among the most important of them. These devices are installed wherever a heating, ventilation, and air conditioning (HVAC) duct penetrates a fire-rated wall, ceiling, or floor. In the event of a fire, these devices should be able to stop flames and smoke from spreading through the HVAC ductwork, allowing occupants more time to evacuate the building and contributing to the reduction of the amount of damage caused by the fire. However, as buildings and systems age and as physical, mechanical, or electrical problems emerge, dampers can become inoperable. This leaves the duct as an open channel for fire and smoke in the event of a fire, and the facility runs the danger of being shut down owing to a lack of compliance. Verifying and documenting that essential FLS building systems perform as expected is accomplished through the process of testing and maintaining fire smoke dampers.

Leak testing and investigations on the pressurized and ducted systems

The majority of the work performed by the TAB consists of testing, measuring, and determining performance benchmarks. Among the most important examples of these operations are determining the air and hydronic volumetric flow rates, determining the level of heat transfer performance, and modifying the air exchange and ventilation rates.

building commissioning Hillsboro OR 97006

Frequently Asked Questions

What is testing, adjusting and balancing? Testing, adjusting and balancing is the process of evaluating temperature and environmental control systems to ensure they're heating or cooling according to design specifications and at the equipment's best level of efficiency.

Air balancing is a method of testing your heating and cooling system to spot any problems that are causing uneven airflow or negative air pressure. Once identified, these problems can be corrected so every room gets the amount of air it needs.

Testing, Adjusting, and Balancing is a vital step for complex air and hydronic systems within buildings and throughout campuses to ensure HVAC systems are optimized for occupant comfort, energy efficiency, indoor air quality, and manufacturing processes.

The key to a comfortable and efficient space is the design and function of a building's HVAC systems. The testing, adjusting, and balancing (TAB) of the systems is what ensures they are functioning properly.