How To Become A Sidemount Technical Scuba Diver Model

How To Become A Sidemount Technical Scuba Diver Light

Sidemount diving originates in cave diving and has since made its way into recreational, non-overhead dives. Simply put, you'll wear your tanks on the side of your body instead of one or two tanks strapped to your back. The tanks attach to the Sidemount BCD with clips and/or long bungee strings, giving you great flexibility. This flexibility allowed cave divers to get their tanks off the surface to make it fit through narrow spaces.

Decompression divers employ oxygen mixtures of all kinds to extend their time looking at wrecks and reefs on the ocean floor. While the sport diver may get two 15 minute bottom time dives at 100ft the decompression diver can cruise around for 60 minutes or more, getting the most bang for their buck.

Does the iceberg from the Titanic still exist —

Every PADI Specialty you complete is one step closer toward the Master Scuba Diver(tm); rating.

There are several more agencies that provide technical diver training which are more region specific. In general the recommendation is to find a reputable instructor, look for recommendations from trusted sources and choose your instructor accordingly. Trust and comfort during the course are invaluable and will help you to feel confident and comfortable to push your boundaries and gain the knowledge you need to go beyond your current certification level.

Sidemount Configuration

I was a bit numb after my initial pool sessions. I was strapped into the twin tanks, trying to conduct valve drills. But, the Tec 40-45 and 50 courses helped me to feel more comfortable and my skills began to improve. By the end of the course, I was enjoying myself. It's about taking your diving skills, buoyancy and awareness up to the next level. This is what Tec diving offers. This is a great feeling. Knowing you're capable in managing life-threatening emergency situations at depth without the need to ascend to the surface (dues decompression requirements), is an amazing feeling. It's very satisfying to execute your dive program with military precision.

Gear - Although the gear is the same, divers who are enrolled in an introductory tech class (Intro Tech, Sidemount, or CCR Air Diluent) will notice fundamental differences in the configuration. Instead of having 2 second stages per cylinder, they are split into two with each stage having a separate first. The gas planning process becomes more detailed and the harnesses have more chrome.

Sidemount Configuration
How long will Titanic last underwater

How long will Titanic last underwater

Sidemount divers usually use two tanks. However, it is possible to use one tank as a standard. I was also told that you can use one tank for deco diving.

New gear means new techniques. Scuba diving sidemount is easy if you have the right skills.

Gas

You don't need to worry about how all this will work. The course includes learning how to set-up your Sidemount equipment, as well as how to measure and adjust clips and bungees so that your tanks are in perfect trim. You will have your instructor to assist you in all aspects.

The Sidemount Diver Specialty course dive may count toward your Advanced Open Water Diver certification – ask your instructor about earning credit.

How To Become A Sidemount Technical Scuba Diver Model
How To Become A Sidemount Technical Scuba Diver 10
How To Become A Sidemount Technical Scuba Diver 10

Because of the difficulties with single orifice doubles and backmounted independents, doubles were introduced to backmounted diving. Independents are two cylinders that are strapped to one's chest with separate regulators. A 1st stage failure would result in only one cylinder being used by the diver. A single orifice double was two cylinders connected together by a valve and one regulator. All gas would be lost if the first stage of a single orifice twice set failed. Today, both problems are eliminated by the isolated manifold doubles. Each cylinder can be operated independently. However, the diver can still inhale gas from both cylinders using one regulator. The doubles are usually held together by metal bands. The valves are connected with an isolation manifold so they can be separated if necessary. Doubles diving with backmounted doubles is similar to a regular single-cylinder backmount. It offers a vertical profile that is the same.

Technical diving is defined by being exposed at the ceiling, which prohibits the diver from reaching the surface at any time during the dive. This can be due either to a literal ceiling (a cave, wreck, or virtual ceiling) or a decompression obligation. In such cases, mandatory decompression stops are required on ascent for anyone who exceeds the NDL. This may require the use of special equipment (e.g. Twinsets, Sidemount, special gas mixtures, and more training are needed to perform those stops as well as other tasks on ascent. This will optimize Nitrogen offgassing.

How To Become A Sidemount Technical Scuba Diver Book

By allowing divers to exhale gas, the rebreather can extend their diving capabilities. The rebreather will then recycle the gas and inject the required amount of gas into the cylinder. This can dramatically increase the dive time when compared to using double the size and weight cylinders, especially for deeper dives. You can have rebreathers back- or sidemounted. The profile they create will depend on their configuration.

It was difficult to get into the pool for my first session. I felt like an open water diver, securing myself in twin tanks and conducting valve drills. As we went through the Tec 40, 45, and 50 courses, I found new skills and was enjoying the course. The best part about Tec diving is the ability to improve your buoyancy, awareness and dive skills. It's quite an experience to know that you can manage life-threatening emergencies at depth without having to go to the surface due to decompression requirements. It's also satisfying to execute your dive plan with military precision.

Check our other pages :

Frequently Asked Questions

To register for the PADI Advanced Rebreather Diver course, you must first: You must be a PADI Open Water Diver, but you must also be a PADI Advanced Open Water Diver to become a PADI Advanced Rebreather Diver. Have at least 30 dives under your belt.