You are looking for the best laser cutting machine to use at home, in a small business, as a hobbyist, or for industrial use in USA, UK UAE, Canada, Australia or Russia?
AMADA's 3kW, 6kW, 9kW, and 12kW ENSIS fiber laser technology utilizes a highly innovative resonator to automatically and precisely adjust the diameter of the laser beam. This unique feature enables continuous processing of thin-to-thick materials by a single machine with no lens change or additional setup required.
Choose the best gas for your needs, and make sure to check that the jet is still in good condition.
An entry-level laser cutter can be purchased for as low as $2,600 or $8,800. It has an 80W CO2 tube laser tube. These tubes are suitable for hobbyists, amateurs, small businesses, as well as beginners and enthusiasts. High-end laser cutting machines, however, can go up to 279,000.00 with 12000W of IPG fiber laser power supply.
The cost of a fiber laser cutter machine ranges from $8,800.00 up to $260,000.00 A CO2 laser cutter can be purchased for between $2,600.00 and 68,800. A mixed-generic laser cutting system can cost from $6,800 up to $32,500
To ensure the service life of the machine, it is necessary to check the straightness and verticality of its track every six months, and if any abnormality is found, it must be maintained and debugged in time.
A fiber laser can be added to any CO2 laser machine. Available in the Fusion Pro Series. A dual source laser machine will increase your capabilities and allow your business to offer more products and make more profit.
With flame cutting, also known as oxygen cutting, a material is heated only to its ignition temperature. Oxygen is used as cutting gas so that the material burns and forms a pure stream of oxide that melts through the additional energy from burning. The cutting oxygen then forces the slag out of the cut piece part.
First, you'll need to set yourself a budget. Remember that if you're going to be monetising this skill, then pushing your budget as high as possible makes sense to get the best end product in the fastest time, and with the lowest usage costs. It is vital to consider the cost of replacement parts – you don't want to find yourself unable to keep the machine running. Another is speed, especially if your aim is to mass produce a product to sell within a limited time. Accuracy is also important so you may want to focus on that when narrowing down your options.
During the sublimation cutting process, the material changes directly from the solid to the gaseous state with as little melting as possible. The cutting gas keeps the particles and vapors away from the optical elements.
Laser cutting machines can be classified as fiber laser machines or CO2 laser machines depending on their laser sources.
The FLCAJ’s fiber engine, combined with the fiber optic delivery cable, has greatly reduced machine operating costs and required maintenance. With no laser gas, mirrors, or moving parts in the laser source, and by consuming a fraction of the energy required by a comparable CO2 laser, the FLCAJ series makes laser processing more economical than ever before.
Fiber laser (straight) delivers high accuracy cuts with low heat input. Laser Cutting Systems’ 10kW fiber laser also offers low maintenance and high efficiency.With fiber laser, a laser beam is guided via a fiber cable, with no adjustment necessary between laser source and carriage. Additionally, no purging gas is required.With a wall plug efficiency of as high as 30 percent, the fiber laser is much more efficient than the CO2 laser. The cutting quality in mild steel is comparable up to 15 mm thickness. Stainless steel and aluminum are also possible.Thus, the fiber laser is a flexible and easy tool that also offers high accuracy and low heat input.
Select the appropriate gas to meet your cutting needs. Also, make sure that you check the jet's condition.
Laser Cutting Process Drawbacks
When compared to other techniques, laser cutting requires a high power consumption.
The laser beam is extremely delicate to handle.
If the laser beam comes into contact with human workers, it is hazardous.
Laser cutting is still unable to cut thick metals.
A CNC laser cutting machine costs between $2,600.00 and $300,000.00. A CNC laser engraving machine costs between $2,400.00 and $70,000.00.
Laser power of 80W. A laser can typically cut up to 10mm acrylic and up to 9mm soft woods.