The hydraulic pressure of 10 tons allows it to perform a wide range of tasks. This press can accept any Mittler Punch & Flare tool or can be used in a hydraulic punch drive. These knockout punches are a cost-effective way to punch holes to make it easier for fabricators to do their jobs. Swag Offroad punches are also available...
They are powered by hydraulic/air.
Hydraulic bench press will reduce arm fatigue and speed up fabrication. The rugged 3/8-inch plate construction allows for a variety of uses. These dies are compatible with an H-Frame machine, hydraulic punch driver, as well as a 3/4-inch or 7/16 drawbol for dimpling PortaFab machine, which is Scotchman’s entry-level Ironworker. This unit packs 45 tons of hydraulic power and is portable 110 volt. It allows for the alignment of punches to punch thin sheet metal. This punch can also be used to punch spring steel for mounting race in order to punch angle iron. You can punch a hole within 9/16 inches of the web. The rotary-style punch can punch holes within 9/16 inches of the web. It also has enough power to punch hydraulic accessory ports on Edwards ironworkers. The punching time. It has a 4.5 second punching time, a jog down punch to ensure alignment and a power retractable punch. You can choose from 115 volt or a US...
Our Porta-Punch punches up to 13/16 inch round holes in 3/8" thick mildsteel with a MAXIMUM strength of 65,000 psi.
Compact design, powered by a hydraulic pump, making it easy to drill holes. It allows the maximum output of 49 tons, maximum pressure of 10,000 psi, and weighs 63 lbs. It comes with optional accessories: hose cord assembly, spanner, sub handle assembly, toolbox, 22mm push and die, 4mm Allen wrench, lockout assembly, and spring balancer.
It is user-friendly and requires no programming.
You can punch any type of hole such as square or round, rectangular, H-type e.t.c in square, rectangular and tube, flat or angle steel.
It has a user-friendly operations interface and requires only the input requirements of the workpiece. It also operates on the workpiece with no programming.
This product is suitable for quick operations, such as hydraulic punching and pneumatic feeding.
This 14-piece hydraulic punch set makes it easy to punch holes in steels of 11 and 16 gauges. This compact design allows you to easily take the hydraulic punch along to any jobsite. It's faster, easier, and more accurate than manual punches.
This machine can quickly punch different shapes, such as oblong and round holes. It has a backup switch to prevent the machine from stopping at any moment. This single-acting hydraulic uses a small hydraulic pump to power it. It also comes with manual and electric hydraulic pumps that can be selected based on the industry you work in.
This machine is equipped with a dual action model, which reduces cycle times. The compact design also makes it possible to minimize material handling. This allows for more efficient holes than other processes.
Gulf States Saw & Machine Co. sells portable, double-acting hydraulic punches. They provide a complete automated process of punching and reverting through their inbuilt dexterous control device.
Some maintenance tips: Always clean the punch and die. Although they do not need lubrication, cleaning can extend their durability. Make use of only Enerpac Oil in both punch and pumps. Match punch and die appropriately at all times. For operations, ensure you set up dies with bigger openings to point downwards. Ensure you change cracked, chipped, or worn-out punches and dies immediately. Always observe the suited lifting force to avoid cracks while processing materials.
A hole punch, also known as a hole puncher or paper puncher, is an office tool used to create holes in sheets of paper, typically for the purpose of storing the sheets in a binder or folder.
A punch is a tool used to make an indent or a hole in a hard surface. They are typically made of a hard metal rod with a narrow tip on one end and a broad flat "butt" on the other.
Hydraulic punches are used to create round, square, or oblong holes in metal. They are intended for use with mild steel, nonferrous metals, and some plastics (non-shattering). Hydraulic punches can be powered by hand pumps, air/hydraulic, gas, or electric pumps capable of producing up to 10,000 psi (700 bar).