Category Archives: Metal Lathes

SMS AC-300 Dual-Spindle Lathe For Sale

Posted on by

SMS AC-300 Dual-Spindle Lathe For Sale

  • Model: Accu-Cell AC-300
  • Control: Fanuc 160i-T
  • Swing: 16.00″
  • Maximum Turning Diameter: 16.00″
  • Maximum Turning Length: 14.00″
  • Spindle Speed: 0 – 3600 RPM Infinitely Variable
  • Chuck Type: Speed Grip Power Collet Chucks
  • Turret Number of Sides: 12
  • Number of Index Positions: 12
  • Z Vertical Slide Travel: 14.00″
  • X Horizontal Saddle Travel: 8.00″
  • Rapid Travel Speed: 650.00″ min.
  • Type: Turret
  • Z2 Vertical Slide Travel: 14.00″
  • X2 Horizontal Saddle Travel: 8.00″
  • Rapid Travel Speed: 600.00″ min.
  • Type: Turret
  • Power: 3-Phase/60hz/480vac Existing
  • Machine Length: 102.00″
  • Machine Width: 124.00″
  • Machine Height: 126.00″
  • Weight: 22,000lbs.
  • Additional: 2 arm overhead gantry robot transfer systems; linear scales for x and z axis; air gauge flex gauge in-line computerized gauging station; Mayfran coolant pumpback system with 16″ 2.2 kw single horizontal chip shredder; GE Fanuc series 90-30 PLC control; air conditioner for electrical cabinet

sms-ac-300-lathe-for-sale

 

Monarch Model 610 Used Engine Lathe For Sale 16″ Swing

Posted on by

Monarch Model 610 Used Engine Lathe For Sale 16″ Swing

  • Swing: 16
  • Year: 1964
  • Model: 610
  • Serial: 46937
  • Available approx. Feb 29th 2016
  • does not include DRO or bed travel dial  & dial mount
  • If you look at the dial for speeds, some of the RPM’s shown on the dial are covered by black tape, that’s because those gears aren’t installed for those RPM’s. So, they just covered them up.

Click Here For Updates on Machines & Equipment As They Become Available
Monarch Used Engine Lathe for Sale 610    Monarch Used Engine Lathe for Sale 610 Monarch Used Engine Lathe for Sale 610Monarch Used Engine Lathe for Sale 610 Monarch Used Engine Lathe for Sale 610 Monarch Used Engine Lathe for Sale 610 Monarch Used Engine Lathe for Sale 610 Monarch Used Engine Lathe for Sale 610

Monarch 13×54 Lathe For Sale

Posted on by

Used Monarch 13×54 Lathe For Sale

  • Size 13″
  • Serial 41610
  • Swing 15.5″
  • Year 1956
  • There is a problem with the drive on this, so it’s being sold as a parts machine
  • Available approx. Feb 29th 2016
  • does not include DRO or bed travel dial & dial mount

Monarch 13x54 Lathe For Sale Monarch 13x54 Lathe For Sale Monarch 13x54 Lathe For Sale Monarch 13x54 Lathe For Sale Monarch 13x54 Lathe For Sale Monarch 13x54 Lathe For Sale

Hardinge Chucker Lathe HC with Threading HCT CF For Sale

Posted on by
Hardinge Chucker Lathe HC with Threading HCT CF For Sale
SPECIFICATIONS:

 

MAX FIXTURE DIAMETER …………….. 9″
MAX DISTANCE FROM FACE OF TURRET
    TO SPINDLE ………………….. 14″
SPINDLE CAPACITY
    WITH ROUND 5C COLLETS ………… 1-1/16″
    WITH 5C STEP CHUCKS ………….. 1-1/16″ TO 6″
    WITH JAW CHUCKS ……………… 6″
SPINDLE TAPER …………………… HARDINGE THREADED NOSE
TRAVEL OF CROSS SLIDE ……………. 4-1/2″
CROSS SLIDE POWER FEED RANGE ……… 11/32 TO 6-1/4 IPM
CARRIAGE POWER FEED RANGE ………… 1/4 TO 10 IPM
VARIABLE SPINDLE SPEEDS, (3 SELECTOR)
    LOW SPEEDS ………………….. 125 – 1,100 RPM
    HIGH SPEEDS …………………. 1100 – 3,000 RPM
MAX DIAMETER FOR THREADING ……….. 6″EXTERNAL, 5″INTERNAL
APPROXIMATE WEIGHT ………………. 1,750 LBS.
 
EQUIPPED WITH:
  • HARDENED AND GROUND DOVETAIL BED
  • LEVER-TYPE COLLET CLOSER FOR TYPE 5C COLLETS
  • INDEPENDENT ELECTRICAL VARIABLE POWER FEED TO CARRIAGE
  • EIGHT STATION CROSS FEEDING TURRET
  • EIGHT POSITION TURRET-TYPE CARRIAGE STOP
  • HARDINGE THREADING ATTACHMENT

Click Here For Updates on Machines & Equipment As They Become Available

 

MACHINE WIRED FOR THREE PHASE 60 CYCLE 230 VOLT OPERATION

 Hardinge Chucker Lathe HC for sale Hardinge Chucker Lathe HC for sale Hardinge Chucker Lathe HC for sale Hardinge Chucker Lathe HC for sale Hardinge Chucker Lathe HC for sale Hardinge Chucker Lathe HC for sale
Hardinge Chucker Lathe 9