70 Ton Heim Single Crank Back Geared Gap Frame Press
- Model TGABG
- Serial Number 2292
- Year 1978
- Capacity 70 Tons
- Bed Area 32″ x 20″
- Slide Area 22.5″ x 16″
- Stroke 6″
- Shut Height 15.5″
- Speed 55 SPM
- Equipped with: Air Clutch and Brake, Motor and Control
Author Archives: Dev
PA Industries Servo Feeder
PA Industries Servo Feeder
- Model SRF 24
- Serial Number 1220693
- Year 1993
- Max width 24″
- Max thickness capacity .090″ at 24″
- Feed Roll Dia 3.55″
Waddington Servo Feeder
Waddington Servo Feeder
- Serial No. PRF-CK4300LCUD4 x4,
- Maximum Width 42″
- Maximum Thick. At Maximum Width .125″
- Feed Length 100′
- Year 2001
500 Ton JSW Plastic Injection Molding Machine – Sold
500 Ton JSW Plastic Injection Molding Machine
- Model – J500E-C5
- Capacity – 500 Tons
- Year – 1993
- Clamp Stroke – 31.50″
- Daylight Opening – 61.02″
- Distance Between Tie Rods – 31.89″ x 31.89″
- Machine Weight – 48,000lbs.
Two Bolster Plates Available
Two Bolster Plates Available 72 x 36 & 72 x 42
- One (yellow edge) 72″ x 36″ x 4 3/4″
- One below yellow 72″ x 42″ x 6″
Signode Strapping Machine
Signode Strapping Machine
- Serial Number 98079
- Model 510
- Volts 220
Pallet Wrapper
Pallet Wrapper
- SIGNODE Spiral Grip Stretch Pallet Wrapper Machine
- Model ELSF
- Serial: 9844
- 120 V 15 A
- Single Phase 60 Hz
- Approximate Dimensions: 9′ L x 6′ W x 78″ T
Aquamaster Flat Belt Parts Washer
Aquamaster Flat Belt Parts Washer
- 3 Stage stainless steel washer with drying stage
- Open in the end is 38″ wide x 42″ high.
- Stage # 1 heated, is 104″ long with 12 risers and 62 nozzles, pump output — GPM
- Stage # 2 heated, is 71″ long with 8 risers and 40 nozzles pump out put 320 GPM
- Stage # 3 is 96″ long and is equipped with heated air blowers and knife blow-offs.
- Tanks are all SS and tunnel is of formed poly designed to swing up for easy access to interior.
- Over all length of system is 30′
Air Feed Roll Feed
Air Feed Roll Feed
- Servo Press Mounted Feeder
- Year – 1999
- Model – DRF
- Capacity – 12″ Wide
40,000lbs. Erickson Die Handler
40,000lbs. Erickson Die Handler
- Year – 1984
- Lift Capacity – 40,000lbs. at 40″ Load Center
- Table – 60″ Long x 72″ Wide
- Table – 21″ Lowered and Lifts 50″
- Overall Length – 150″
- Volt – 72 w/ Good Batteries and Chargers