Tube Laser Cutting Systems K40

High-speed cutting is often the first thing fabricators associate with fiber laser cutting technology. Although this may be true for tube cutting, speed is a relative term. It is not about cutting speed, but the time it takes for a tube to be processed to meet its specifications.

When you look closely at a fiber-laser in operation, some things may not be as obvious. A fiber laser's beam diameter is one-third larger than that of a co2 beam. This allows it to have a higher power density. This allows the fiber not only to cut faster but also to pierce much faster. The fiber's smaller beam size allows it to cut intricate shapes, and leave sharp edges. Imagine cutting the logo of your company from a tube where the spacing between the letters is 0.035inches. A fiber can achieve that cut while a laser with CO2 cannot.

How can you compensate for this? Traditionally, you will touch your face with a sensor marking the contact point. The tube is then rotated and the opposite end of the tube touched. The control will then be able to see how bent the tube looks. This allows for precise measurements and ensures that the through-holes will work properly. Keep in mind, however, that every rotation of the tube reduces the ability for very high tolerances.

How can you compensate? Traditionally, you would touch the contact points by coming down. Next, rotate the tube and touch the opposite side. This will give the control an indication about how bent the tube may be. This can be used to ensure that through-holes fit the application. Be aware that this reduces your ability to deliver very precise tolerances every time the tube rotates.

We offer you the ideal solutions for the world of laser tube cutting. Find out here how lasers can eliminate entire process steps while also increasing the range of parts you can produce.

TruLaser Tube 5000 fiber is an affordable laser tube cutting machine. It's easy to use and reliable, making it ideal for new users as well as those who need a second machine.